PreSonus StudioLive 16R 18-input, 16-channel Series III Stage Box and Rack Mixer

The PreSonus StudioLive single rack space 16R is an 18-input, 16-channel Series III stage box and rack mixer. It serves as either a simple stage box or a combination stage box and monitor mixer. Since Series III rack mixers and consoles can network using AVB, you can connect your StudioLive 16R to a Series III front-of-house console (sold separately) with one lightweight CAT5e or CAT6 Ethernet cable, eliminating the need for a heavy, expensive copper snake—and the signal degradation that goes with long analog cable runs. You can even remote control the StudioLive 16R’s preamps and phantom power from your networked Series III console. In stage box + monitor mixer mode, the StudioLive 16R not only serves as an excellent networked stage box, it is a full-blown monitor mixer with far more processing and mixing power than any mixer in its class.

System Requirements:

• Mac
  • Mac® OS X 10.8.5 64-bit or later
  • Intel® Core™ 2 Duo processor (Intel Core i3 or faster recommended)
  • 4 GB RAM (8 GB or more recommended)
• Windows
  • Windows® 7 x64/x86 SP1 + platform update, Windows 8.1 x64/x86, Windows 10 x64/x86
  • Intel Core 2 Duo (Intel Core i3 or faster recommended)
  • 4 GB RAM (8 GB or more recommended)
• Mac and Windows Systems
  • USB 2.0 port
  • Internet connection
  • Internal or external 7200 RPM storage drive highly recommended
  • 34 GB hard disk space
  • Monitor with 1366x768 resolution
• iOS
  • iOS 9.3 or later
  • iPad Pro, iPad Air 2, iPad Air, iPad mini 4, iPad mini with Retina display, iPad (4th generation), iPad mini, iPad (3rd generation), iPad 2
• Android (QMix-UC)
  • Android™ 5.0 (Lollipop) or later
  • Android smartphone (QMix-UC)
  • Android tablet (8-inch) with 1024x768 resolution (UC Surface)

PreSonus StudioLive 16R Features:

• Local inputs and outputs
• Channels and buses
• Networking connections
• Recording
• Signal processing
• Scenes and presets
• Digital
• Actively integrated software

PreSonus StudioLive 16R Specifications:

• Microphone Preamplifier:
  • Input Type: Combo locking XLR mic-¼” TRS line
  • Frequency Response to Main Output (at unity gain): 20-20 kHz, ±0.5 dBu
  • Input Impedance: 1 kOhm
  • THD to Main Output: < 0.005%, +4 dBu, 20-20 kHz, unity gain, unwtd
  • S/N Ratio to Main Output (Ref = +4 dB, 20 kHz BW, unity gain, A-wtd): 94 dB
  • Common Mode Rejection Ratio (1 kHz at unity gain): 65 dB
  • Gain Control Range (±1 dB): 0 dB to +60 dB
  • Maximum Input Level (unity gain): +12 dBu
  • Phantom Power (±2 VDC): 48 VDC, switchable per channel
• Main Outputs:
  • Type: XLR Male, balanced
  • Maximum Output Level: +24 dBu, ±0.5 dBu
  • Output Impedance: 100 Ohms
• Headphone Output:
  • Type: ¼” TRS Female, active stereo
  • Maximum Output: 100 mW/ch. @ 60 Ohm load
  • Frequency Response: 20 Hz – 20 kHz (± 0.5 dB)
  • THD+N: 0.01%, 1 kHz, max gain, 20 Hz BW, unwtd
  • S/N Ratio: 96 dB, 1 kHz, max gain, 20 Hz BW, unwtd
• Digital Audio and Control:
  • ADC Dynamic Range: 115 dB (A-wtd, 48 kHz)
  • DAC Dynamic Range: 115 dB (A-wtd, 48 kHz)
  • USB Recording Port: USB 2.0, Type-B
  • Network Control Port: RJ-45
  • AVB Audio Network Port: Ethercon
  • Internal Processing: 32-bit, floating point
  • Sampling Rate: 48 kHz (44.1 kHz coming soon)
  • A/D/A Bit Depth: 24
  • Reference Level for 0 dBFS: +18 dBu
  • Total System Latency: 1.9 ms (local routing, analog in-analog out, all processing active)
• Power / Environmental:
  • Connector: IEC
  • Input-Voltage Range: 90 to 230 VAC (±10%)
  • Power Requirements (continuous): 85W
  • Recommended Ambient Operating Temperature: 32° to 104°F (0° to 40°C)
• Physical:
  • Dimensions (HxWxD): 1.75 x 19 x 12" (45 x 483 x 308 mm)
  • Weight: 8.6 lbs (3.9 kg)