Teradek Bolt 925 Wireless H.264 Transmitter & Receiver Set with HD-SDI and HDMI

Teradek's TER-BOLT-925 (SKU 10-0925) is a member of their Bolt offerings, with this model being a Bolt 500 3G-SDI Video Transceiver Set. The Bolt is a zero delay wireless video transmission system designed for the most demanding cinema, broadcast, and UAV applications. At less than 1ms latency, Bolt can transmit 1080p60 4:2:2 video at up to 500ft line of sight over the unlicensed 5GHz band.

With highly refined software, new wireless radios, and a redesigned chassis, these new models are the most reliable and capable monitoring solutions Teradek have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable, manual frequency selection and USB 3.0 GRAB Engine are all included on these new models.

Teradek's Bolt is a premium wireless video solution for cinematographers, broadcasters, and independent content creators. Teradek manufactures wireless video devices for remote video capture, camera control, real-time monitoring, color correction and webcasting. For complex IP video systems, Teradek's cloud-based workflow management platform allows users to remotely operate a fleet of Teradek encoders in real-time from anywhere in the world. All Teradek products are designed and manufactured in the USA.

Teradek Bolt 925 Includes:

• 2x HDMI Type A to Type A 12 in Cable
• 2x SDI BNC to BNC 10 in Cable
• 1x Bolt 500 TX
• 1x 2-pin Lemo to PowerTap 18 inch Cable
• 1x Hot Shoe Adapter (1/4"-20 inch)
• 1x SDI (BNC to BNC) Cable 10 inch
• 1x HDMI 18 in Cable (Type A to Type A)
• 1x Bolt 500 RX
• 1x Thumb Screw 1.25 inch length (1/4"-20 inch)
• 1x Lightstand Adapter (1/4"-20 inch)
• 1x SDI (BNC to BNC) Cable 10 inch
• 1x HDMI 18in Cable (Type A to Type A)
• 1x USB 3.0 Cable A to Micro B (3ft Length)
• 1x PSU 2-Pin Lemo to 18W AC Adapter 6ft cable

Teradek Bolt 925 Features:

• Longer Range
• 20MHz Channels
• 2 New DFS Channels
• 20% Smaller Chassis
• Individual Identity
• Rapid Reconnection
• Built-In HDMI to SDI Converter
• More Robust Than Ever Before

Teradek Bolt 925 Specifications:

• Teradek SKU: 10-0925
• Bolt 500 TX:
  • Audio Input: Embedded Audio Input
  • Video Inputs: 1 x 75 Ohm BNC
  • Video Outputs: 1 x 75 Ohm BNC (Loop-out)
  • Color Sampling: Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later); RGB 4:4:4 (HDMI out, 8-bit color)
  • Delay TX To RX:
• Wireless:
  • Non-DFS Frequencies: US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz, EU & JP: 5.19 ~ 5.23 GHz
  • DFS Frequencies: US: 5.27 ~ 5.55 GHz and 5.67 GHz, EU & JP: 5.27 ~ 5.67 GHz
  • RF Channel Selection: Auto only (NOT configurable)
  • RF Power: 17dBm EIRP
  • Range: Up to 500ft line of sight
  • Noise Rejection: Can coexist with WiFi and 5GHz cordless phones
  • Power Input: 2-Pin Lemo 7-28 VDC
  • Nominal Power Consumption: 7.3 Watts (Measured at 1080p60)
• Bolt 500 RX:
  • Video Outputs: 1x 75 Ohm BNC / 1x USB 3.0 micro B receptacle / 1x Type A receptacle HDMI
  • Audio Input: Embedded Audio Input
  • Delay TX To RX:
  • Audio Compression: 48kHz 24-bit PCM
  • RF Channel Selection: Auto only (NOT configurable)
  • RF Power: 15dBm EIRP
  • Range: Up to 500ft line of sight
• Wireless:
  • Non-DFS Frequencies: US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz/EU & JP: 5.19 ~ 5.23 GHz
  • DFS Frequencies: US: 5.27 ~ 5.55 GHz and 5.67 GHz/EU & JP: 5.27 ~5.67 GHz
  • Power Input: 2-Pin Lemo 7-28 VDC
  • Nominal Power Consumption: 9 Watts (Measured at 1080p60)