Ace Backstage ISO102BBXW 6" Deep Back Box with AC Isolation and Poly Encapsulation

The ACE Backstage ISO102BBXW is a 4.5" deep Stage Pocket back box equipped with an AC isolation bracket.

ACE's polyurethane encapsulated back boxes provide extra protection from incursion of moisture and water by sealing seams, knock-outs, and holes. A 1/16" thick jacket of polyurethane is applied to the exterior sides and bottom of the BBX series back boxes, permanently bonding with surfaces to form a moisture resistant seal. The polyurethane back box provides protection against harsh climate, chemicals, impact and abrasion.

The Isolation Bracket sits tightly beneath the pocket, inside the back box, to maintain secure separation of high and low voltage, ensuring manual isolation.

ACE Backstage Co. ISO102BBXW Features:

• DURABLE CONSTRUCTION: ACE polyurethane Back Boxes are made from tough, welded 14 gauge steel (0.071" thick). Ace Standard AC Isolation Brackets are made from 16 gauge galvaneal (0.064" thick)
• ELECTRICAL KNOCKOUTS: ACE polyurethane Back Boxes come with standard Electrical Conduit Combination Knockouts. 1/2", 3/4", 1", and 1-1/4" Knock Outs, two places typical on opposing sides. 1/2" and 3/4" Knock Outs one place typical on opposing sides
• PROTECTIVE COVER: Included with all ACE Back Boxes is a disposable, protective cover with a clear zonc corrosion resistant finish. This cover maintains a clean Back Box until the pocket is installed
• DURABLE FINISH: Clear zinc corrosion-resistant finish (before applying polyurethane)