SPL PHONITOR-2 Phonitor 2 120V Rail Headphone Monitoring Amplifier

The SPL Phonitor 2 is a 120V Rail Headphone Monitoring Amplifier.

SPL Phonitor 2 Features:

• 120V Rail headphone amplifier, preamplifier and monitor controller
• For all headphones with impedances >10 Ohms (>40 Ohms for balanced headphones)
• Innovative Phonitor Matrix: speaker-equivalent listening on headphones
• Laterality control: super-fine balance control
• Solo L/R, Polarity ø L/R, Mono/Stereo
• Volume remotely adjustable (learns any IR remote control)
• Maximum output power: 2 x 2W (1kHz/300Ohm)
• Frequency response: 4Hz - 480kHz (-3dB)
• THD+N: 0.00091% (HP), 0.00085% (Line)
• Dynamic range: 133.62dB (HP), 134.37dB (Line)
• Made in Germany

SPL Phonitor 2 Specifications:

• XLR Input
  • Neutrik XLR, balanced, Pin 2 = (+)
  • Impedance: ca. 20 kohms
  • CMR: -82 dBu (at 1 kHz)
  • Max. Input Level: +32.5 dBu
• RCA Input
  • RCA, unbalanced (single ended)
  • Impedance: ca. 10 kohms
  • Max. Input Level: +32.5 dBu
• Headphone Output
  • 6.35 mm TRS connector
  • Pin wiring: Tip = Left, Ring = Right, Sleeve = GND
  • Impedance: 0.18 Ohm
  • Damping Factor: 180 @ 40 Ohm
  • Frequency Range: 10 Hz to 300 kHz ( -3 dB)
  • Crosstalk at 1 kHz: -90 dB
  • THD&N: 0.00091 % (at 0 dBu, 1 kHz, 100 kohms load)
  • Noise (A-weighted): -103 dBu
  • Dynamic Range: 135.5 dB
• Power Supply
  • Mains voltage (switchable): 230 V AC / 50 Hz or 115 V AC / 60 Hz
  • Fuses: 230 V: T 630 mA; 115 V: T 1 A
  • Power consumption: max 24 VA
• Dimensions (incl. feet) (W x H x D): 10.95 x 3.94 x11.19" (278 x 100 x 335 mm)
• Weight:
  • 4.3 kg; 9.5 lbs (unit only)
  • 5.4 kg; 11.9 lbs (shipping)