Product Overview
ETC's Source 4WRD-C-1 (Watt Reduction Device) LED, part of their Source 4WRD series, is a replacement for a standard Source Four® burner assembly that converts the HPL source to a whilte-light LED and delivers a significant reduction in power consumption. This particular model comes in a white housing and is terminated with a grounded 20A twistlock connector.
It's a simple and quick upgrade that is nondestructive and takes less than a minute. In most cases, it can even be performed without breaking the fixture's focus. The Source 4WRD LED is theatrically dimmable using DMX, or line dimmable, with a traditional LED curve, to enable flexibility for your installation. And, because it's an LED source, your fixtures will run cool and efficient without lamp replacements.
Applications:
- Energy saving retrofits
- Houses of worship
- Universities and schools
- Hospitality
- Retail
- Exhibition centers
- Meeting rooms
- Clubs
- Cafetoriums
- Theaters
ETC Source 4WRD-C-1 Specifications:
- Physical:
- Rugged, die cast aluminum construction
- Can be fitted to any Source Four fixture body (not for Source Four Par/nel, Fresnel, or jr.)
- (7) segment display for simple DMX setup
- 2-button user interface
- Easy mounting with single screw attachment
- Replaces Source Four burner assembly
- IP20 rating for indoor use only
- UL and cUL Listed
- Electrical:
- 114-125V, 60 Hz
- 155 Watt draw at full (182 Watt theoretical max draw)
- 30,000 hour L70 rating (ETC estimate)
- DMX in and thru via RJ45 connector (DMX is not self-terminating)
- AC and DMX dimmable
- (2) fixtures per circuit (D20 module) when using AC dimming
- (14) fixtures per non-dim circuit (R20 module) when using DMX dimming
- Inrush: 30A (first half-cycle) at 120V
- Typical Power Consumption at 120V:
- Idle Power / Current:
- DMX Mode: 1.2W/0.046A
- AC Mode: 0W
- Full Intensity Power / Current: 155.7W/1.35A
- Optical:
- Tool free field adjustment
- LED lamp consisting of four CREE LED modules
- LED lamp is fragile and should not be touched
- 3000K, 80CRI output
- Uses the Source Four ellipsoidal's existing reflector and optical system
- Thermal/Environmental:
- 41° F to 104° F operating range (5° to 40° C)
- Fixture must be above freezing temperatures for one hour before being energized
- Quiet fan cooling
- Fixture is designed for continuous operation up to 104° F (40° C) ambient temperature, and requires free flow of air around fixture housing