Product Overview
TC Helicon Mic Mechanic 2 is a compact vocal toolbox in a easy-to-use pedal. As your personal sound engineer, Mic Mechanic 2 provides time-tested tone and effects you can take anywhere to always sound your best.
Reverb simulates a physical space, allowing your voice to fit into the music perfectly. Whether it’s something small like a room or large like a concert hall, Mic Mechanic 2’s vocally tuned reverb compliments your voice and enhances every performance.
Echo (the effect formally known as delay) allows you to add repeats of your vocals, timed with your music. This cool effect helps your vocals really gel with the song. Whether you choose a lot of repeats, repeats, repeats… or just a few, you’re in control. Mic Mechanic 2 also allows you to set the tempo via the footswitch, so it’s as easy as tapping your foot in time with the music.
TC Helicon Mic Mechanic 2 Features:
- 8 high quality Reverb and Echo presets
- Separate Reverb (Room, Studio, Hall) and Delay (Tapand Slap), with combinations of both
- Footswitch tapping can match echoes to song tempo
- Tone button for Adaptive EQ, Compression, De-essingand Gatingdes
- Battery operation (batteries optional)
- Auto Chromatic Pitch Correction
- Easy connection between standard mic and mixer
- Phantom power always available
- Low noise microphone pre-amp
- Automatic input gain – no more setting and adjustinginput gain
- Mic Control for remote on/off switching with optionalTC-Helicon MP-75, MP-76 (main button only) and Sennheiser e835 FX mics
- Individual style select/mix controls for Reverb andEcho
- Rugged all-metal construction
- USB connection to Voice Support application offeringupdates, product-specific news and more
- 9V operation (vs 12V) to accommodate common pedalboard power supplies
TC Helicon Mic Mechanic 2 Specifications:
- Included Effects
- Echo and Delay
- Reverb
- Tone
- Correction
- Control
- 8 high quality Reverb and Echo presets
- Dry/Wet mix
- Correction amount
- Adaptive Tone on/off
- Mic Control on/off
- Mic input gain level
- Footswitch on/off
- Design
- Dimensions (H x W x D): 5.4" x 3.5" x 2.3" (140 x 90 x 60 mm)
- Weight: 0.92 lb. (0.42 kg)
- Two-part die cast metal
- Rubber adhesive feet
- Connections
- Mic In to Out:
- Input Connector: XLR female, balanced
- Input Impedance: 3k4/1k7 Ohm
- Input Clip Sensitivity: -1 dBu
- SNR A Weighted: >114 dB
- Phantom Power: 24V (always on)
- Output Connector: XLR male, impedance balanced, pin 2 hot
- Output impedance: 200/100 Ohm
- Output Full Scale Level: +7.5 dBu
- Input to Output Frequency Response: +0/-0.3 dB, 20 Hz to 20 kHz
- Safety and Regulations
- Power:
- Power Supply (Not Included): 9V 670mA
- Power Consumption: 6W
- Safety:
- EMC – Complies with EN 55103-1 and EN 55103-2 FCC part 15, Class B, CISPR 22, Class B
- Safety – certified to IEC 65, EN 60065, UL6500 and CSA IEC 65, EN 60065, UL6500 and CSA
- Environment:
- Operating Temperature: 32°F to 122°F (0°C to 50°C)
- Storage Temperature: -22°F to 167°F (-30°C to 70°C)
- Humidity: Max. 90 % non-condensing
