RDL DS-AVM4 Audio/Video Decora Jack Panel, Stainless, DB15, Phono, Mini

RDL's DS-AVM4 is well-suited for installations requiring a wall-mounted audio and video monitor input or output plate for computers, monitors and projectors. The panel is typically installed as an audio/video input plate, but may equally be used as an output jack panel.

The front panel features a pass-through video monitor connector. Video connections are made on the front and rear panel using a standard DB15 video connector.

The front panel features two gold plated phono jacks and a single stereo mini-jack, intended for stereo consumer line level audio sources. An input signal may be connected to either the phono jacks or to the mini-jack. The left and right signal inputs are fed to a rear-panel detachable terminal block. The audio signals are unbalanced and are intended for short wiring runs where balanced lines are not required.

RDL DS-AVM4 Features:

• Stereo audio inputs to stereo audio output
• Stereo inputs on RCA jacks and stereo mini-jack
• Unbalanced output on detachable terminal block
• Video monitor pass-through panel connector

RDL DS-AVM4 Specifications:

• Audio input connectors (3): RCA jacks with gold contacts (Left and Right), Mini-jack 3.5 mm (Stereo)
• Video input connector: Female DB15
• Audio output connector: Detachable terminal block (Left and Right unbalanced audio)
• Video output connector: Female DB15 (pass-through from front panel)
• Dimensions: Height: 4.13" H x 1.3" W x 1.8" D (10.49 x 3.3 x 4.57 cm)
• Mounting Box Minimum Depth: 0.15" (0.38 cm) plus the depth of the installer-provided video connector