Radial Engineering LX2 Passive Line Splitter, 1 Input, 1 Direct Out, 1 Jensen Isolated Output

The Radial LX-2™ is a passive balanced line level audio splitter which will simply send an audio signal to two different destinations at once noiselessly, while also providing the ability to attenuate the signal to tame hot outputs from a mixing console or mic preamp.

The LX-2 splits the signal into two outputs: one that is directly wired, and one isolated by a premium Jensen transformer. Both also offer a ground lift to ensure noiseless operation. The "trim" knob attenuates the input signal in case it is too hot for your signal's destination, but a recessed "set & forget" switch is included so you can turn it off if attenuation is not desired, which avoids accidental adjustments.

As with all Radial products, it is built with tough materials and the bookend shape protects your connections in case of drops. For a reliable and noiseless line splitter, why look anywhere else than the Radial LX-2?

Features

• Split one audio signal to two destinations simultaneously
• Jensen® transformer equipped for exceptional audio quality
• Eliminates hum and buzz caused by ground loops
• Variable trim control can be engaged for easy level adjustment

Specifications

• Audio Circuit Type: Passive, transformer based
  • Transformer: Jensen JT-11-FLPCH
• # of Channels: 1 input, 1 isolated output, 1 direct output
• Frequency Response: 20 Hz to 20 kHz, ±0.5 dB
• Dynamic Range: 140 dB
• Gain: -1.5 dBu
• Total Harmonic Distortion: < 0.001% @ 1 kHz
• Phase Deviation: +0.3° @ 20 Hz
• Common Mode Rejection: 94 dB @ 60 Hz, 83 dB @ 3 kHz
• Noise Floor: -119 dBu
• Input Connector: Combo XLR/TRS
  • Input Impedance: 716 Ω
  • Maximum Input: +21 dBu
  • Max Attenuation — Trim Control: -10 dB into a 10 kΩ load
• Output Connectors: 2 x XLR
  • Output Impedance: 116 Ω
• Features: Ground lift, level control
• Construction: 14-gauge steel
• Power: Passive, no power required
• Conditions: For use in dry locations only, 5-40°C
• Dimensions (H x W x D): 2" x 3.3" x 5" (48 x 84 x 127 mm)
• Weight: 1.5 lbs (0.7 kg)