EAW MK2326I-WHITE MK2326i White 12" 2-Way Full Range Speaker in White

The MK2300i Series of 2-way, high output, trapezoidal loudspeaker systems from EAW are designed as main PA elements for smaller venues, including small houses of worship and auditoriums/theaters, corporate A/V systems, hotel ballrooms and meeting rooms. This model comes in the color of white. The Series is also excellent for distributed or fill purposes in larger venues, including large houses of worship and auditoriums/theaters, arenas, stadiums, nightclubs, and themed-entertainment complexes.

To meet the design goals for the intended applications, EAW engineers developed a new, high performance, 3-inch voice coil, 1.4-in exit compression driver, loading it with a selection of six different HF horns with coverage patterns ranging from 60° x 45° to 120° x 60°. The horns are as large as the enclosure size allows to maintain consistent directivity throughout the HF passband. A 3-inch voice coil, 12-inch LF driver was used to complement the sonic character and output of the HF driver. All MK2300i models are carefully voiced to sound similar, permitting diverse horn patterns to be mixed throughout an installation while maintaining the same sonic quality. The result is clean, high-fidelity output at significantly higher levels than would be expected from loudspeakers of this size and price.

Users can select between single-amp and bi-amp (external processor) operating modes. In either operating mode, EAW’s beamwidth-matching crossover/ filter design delivers even power response throughout the crossover region, eliminating the discontinuities that plague other two-way loudspeakers.

The MK2300i Series systems are the smaller companions to the MK5300i Series systems. Enclosures for both series are the same height, facilitating installation where more than one horn pattern and/or type of loudspeaker capability is needed. In addition, SBK Series subwoofers also share this height, creating attractive arrays that use EAW’s preconfigured accessory flybar.

EAW MK2326i Specifications:

• Part Number: 2039727
• Enclosure:
  • Material: Exterior-grade Baltic birch plywood
  • Finish: Wear resistant textured white paint
  • Grille: Powder-coated perforated steel
• Configuration:
  • Subsystem:
    • Transducer: LF – 1x 12 in. cone; HF – 1x 1.4 in. exit, 3 in. voice coil compression driver
    • Loading: LF – Vented; HF – Horn-loaded
  • Operating Mode:
    • Amplifier Channels: Single-amp LF/HF; Bi-amp LF, HF
    • External Signal Processing: High pass filter; DSP w/2-way filters
  • Performance:
  • Operating Range (-10 dB, Hz): 65Hz – 18KHz
  • Axial Sensitivity (1W @ 1m, dB SPL):
    • LF: 97
    • HF: 100
    • Full Range: 95
  • Power Handling/Impedance (Watts @ Ohms):
    • LF: 600 @ 8
    • HF: 150 @ 8
    • Full Range: 600 @ 8
  • Calculated Maximum Output Peak (dB SPL):
    • LF: 131
    • HF: 128
    • Full Range: 128
  • Calculated Maximum Output Long Term (dB SPL):
    • LF: 125
    • HF: 122
    • Full Range: 122
  • Nominal Coverage (degrees):
    • Horizontal: 120
    • Vertical: 60
  • Dimensions (inches/millimeters):
    • Height: 30.00/762
    • Width (front): 15.54/394.7
    • Width (rear): 8.75/222
    • Depth: 14.75/374.7
  • Trap. Angle (degrees per side): 15
  • Weights (pounds/kilograms):
  • Net: 60/27.2
  • Shipping: 70/31.8

Note:

Actual product is WHITE and may vary in appearance and specification. For more information on this and other products, please contact your Sales Pro.