Panasonic PTRW930LWU

PT-RW930LWU

OUR PART #:  PTRW930LWU

Write the First Review.

Call for price! Not available online.
List Price: $18,599.00

  • WXGA (1,280 x 800) resolution
  • 10,000 Lumens (Center)/ 9,400 Lumens Measured according to strict international ISO 2111 standards.
Print this page.

Related Products

Panasonic's PT-RW930LWU, part of their PT-RZ970 series, comes with immersive picture quality along with practical features. Potential applications extend from signage, exhibition/rental, and staging, through permanent installation roles in museums, theaters, and control rooms. As it's powered by the acclaimed SOLID SHINE Laser drive and current 1-Chip DLP™ technology, it exceeds expectations with color performance that's vivid, and low-maintenance stability lasting longer than competitive products through years of 24/7 operation.

The Panasonic SOLID SHINE Laser system provides brilliant images with unfailing dependability, featuring next-generation DLP™ technology that delivers high-resolution detail, plus dual laser modules outputting up to 10,000 Lumens (Center) of brightness, Quartet Color Harmonizer to reduce energy loss from the light source, and durable heat-resistant phosphor wheel.

The Quartet Color Harmonizer wheel system can capture a broader color space than comparable projectors, allowing white to be realistically reproduced on screen. Some conventional projectors cannot attain an accurate white balance, so images can include a distracting greenish tint. This is not true for Panasonic SOLID SHINE Laser projectors.

There are no lamps to replace, thanks to the long-lasting dual solid-state laser modules, and image color/brightness degrades much more gradually, and in a more linear, consistent fashion. So maintenance hassle are reduced, with out-of-the-box picture quality sustained longer.

Panasonic PT-RW930LWU Includes:

  • PT-RW930LWU projector body
  • Power cord with secure lock
  • Wireless/wired remote control unit
  • Batteries (R03/AAA type x 2)
  • Software CD-ROM (Logo Transfer Software, Multi Monitoring, and Control Software)

Panasonic PT-RW930LWU Features:

  • WXGA (1,280 x 800) resolution
  • 10,000 Lumens (Center)/ 9,400 Lumens Measured according to strict international ISO 2111 standards.
  • 10:000:1 Contrast Ratio
  • Geometric Adjustment

Panasonic PT-RW930LWU Specifications:

  • Main unit: Power supply: AC100 - 240V 10.4-5.0A 50Hz/60Hz
  • Power consumption*1:
    • NORMAL: 742W ECO: 617W LONG LIFE1: 410-588
    • LONG LIFE 2: 375-588W LONG LIFE 3: 349-588W SHUTTER: 82W
    • STANDBY MODE [ECO]*1: 0.2W STANDBY MODE [NORMAL]: 3W
    • STANDBY MODE (When the [QUICK STARTUP] function is enabled): Approx. 85 W
  • DLP™ chip: 0.65" (16.5mm) diagonal (16:10 aspect ratio)
  • Light source: Laser diodes laser Class 1 (Class 3R for US models), light source life*2: 20,000 hours (Normal Mode) / 24,000 hours (Eco Mode). At this time the brightness will have decreased to approximately half of its original level.
  • Brightness: 10,000 Lumens (Center)*2/9,400 Lumens *3
  • Center-to-corner uniformity*3: 90 %
  • Contrast*3: 10,000:1 (Full on/off, with Dynamic Contrast Mode set to "3")
  • Resolution: 1,280 x 800 pixels
  • Scanning frequency:
  • HDMI/DVI-D/DIGITAL LINK:
    • 480i (525i)*4, 576i (625i)*4, 480p (525p), 576p (625p), 720 (750)/60p, 720 (750)/50p, 1080 (1125)/60i, 1080 (1125)/50i, 1080 (1125)/25p, 1080 (1125)/24p, 1080 (1125)/24sF, 1080 (1125)/30p, 1080 (1125)/60p, 1080 (1125)/50p, VGA (640 x 480)–WUXGA*5 (1920 x 1200) (compatible with non-interlaced signals only), dot clock: 25–162 MHz
  • RGB: fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 20-162 MHz.
  • YPBPR (YCBCR):
    • fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
    • fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
    • fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
    • fH: 33.75 kHz, fV: 60 Hz [1035 (1125)/60i]
    • fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
    • fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p]
    • fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p]
    • fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p]
    • fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
    • fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
    • fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
    • fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
    • fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p]
    • fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF]
    • fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p]
  • Video/YC:
    • fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
    • fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
  • Optical axis shift*6:
    • Vertical: +60 %, -16 % (powered)
    • Horizontal: +30 %, -10 % (powered)
  • Keystone correction range:
    • Vertical: ±40 ° (±22 ° with ET-DLE085/DLE055 lenses, +5 ° with ET-DLE030 lens)
    • Horizontal: ±15 ° (cannot be operated with ET-DLE030 lens)
  • Installation: Ceiling/floor, front /rear, free 360-degree installation
  • Terminals:
    • HDMI IN: HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
    • DVI-D IN: DVI-D 24-pin x 1
    • RGB 1 IN: BNC x 5 (RGB/YPBPR/YCBCR/YC/Video x 1)
    • RGB 2 IN: D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
    • SERIAL/MULTI PROJECTOR SYNC IN: D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
    • SERIAL/MULTI PROJECTOR SYNC OUT: D-sub 9-pin (male) x 1 for link control
    • REMOTE 1 IN: M3 x 1 for wired remote control
    • REMOTE 1 OUT: M3 x 1 for link control (for wired remote control)
    • REMOTE 2 IN: D-sub 9-pin (female) x 1 for external control (parallel)
    • LAN/DIGITAL LINK: RJ-45 x 1 (for network, DIGITAL LINK connection, 100Base-TX, compatible with Art-Net, PJLink™)
  • Cabinet materials: Molded plastic
  • Dimensions: 19-19/32" W x 7-7/8" H*7 x 21-3/16" D (498 x 200 *7 x 538 mm)
  • Weight*8: Approximately 49.4 lbs (22.4 kg)
  • Noise level*3: 41 dB
  • Operating environment:
    • Operating temperature: 32-113 °F (0-45 °C)*9
    • Operating humidity: 10-80 % (no condensation)

Note

Notes:

*At this time the brightness will have decreased to approximately half of its original level (Dynamic Contrast Mode: 3, Image Mode: Dynamic). Panasonic recommends cleaning or checkup at point of purchase after about 20,000 hours. Light source lifetime may be reduced depending on environmental conditions. Replacement of parts other than the light source may be required in a shorter period.

Note: Lens(es) sold separately. Contact your Sales Pro for more information regarding lens compatibility.

Note: All lenses sold separately.

Notes:

*1 Operating temperature 77 °F (25 °C), altitude 2,297ft (700m), IEC62087: 2008 Broadcast Content, Picture Mode: Standard, Dynamic Contrast: 2.

*2 Measured at center area of projector screen. Measurement method is in compliance with ISO/IEC 21118: 2012. Value is average of all products when shipped.

May differ depending on actual unit.

*3 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards.

*4 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal).

*5 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).

*6 Optical axis shift is not supported on the ET-DLE055, and the optical axis is fixed with the ET-DLE030 (lenses sold separately).

*7 With legs at shortest position.

*8 Average value. May differ depending on the actual unit.

*9 When used in locations from 0ft to 13,780ft (0 m to 4,200m) above sea level in Normal Mode, and from 0ft to 8,858ft (0m to 2,700m) above sea level in other modes. If the ambient temperature exceeds 86 °F (30 °C) when used in locations from 0ft to 8,858ft (0m to 2,700m) above sea level, or if it exceeds 77 °F (25 °C) when used in locations from 8,858ft to 13,780ft (2,700m to 4,200m) above sea level, the light output may be reduced to protect the projector.

Notes On Use:

1. Do not install the projector in locations that are subject to excessive water, humidity, steam, or oily smoke. Doing so may result in fire, malfunction, or electric shock.

2. Please observe the following precautions:

• Never place objects on top of the projector while it is in operation.

• Make sure there is an unobstructed space of 1ft, 8" (500mm) or more around the projector's exhaust openings.

• Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection.

When stacking projector units, be sure to provide the amount of space indicated below between them.

These space requirements also apply to installations where only one projector unit is operating at one time and the other unit is used as a backup.

• Make sure that nothing blocks the projector's air intake and exhaust openings.

Also, install the projector so that cool or hot air from other air conditioning equipment does not flow directly toward the projector’s air intake or exhaust openings.

• Do not install the projector in an enclosed space. If it is necessary to install it in an enclosed space, add a separate ventilation system.

If ventilation is insufficient, hot air will accumulate at the intake opening. This may cause the projector's protective circuit to interrupt projector operation.

• If the projector is placed in a box or enclosure, ensure the projector's intake and exhaust openings are not blocked.

Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake.

3. Because the ET-DLE055/DLE030 is a fixed short-throw lens, the lens shift function cannot be used with it (lenses sold separately).

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Panasonic ETDLE030 ET-DLE030

Panasonic ETDLE030 ET-DLE030

Mounting Panasonic's ET-DLE030 ultra-short-throw lens onto their 1-chip DLP™ projector lets you shorten the projection distance by approximately 60 % as compared to the ET-DLE085 and ET-DLE080 short-throw lenses.This ...
$5,249.00 List Price: $6,299.00You Save 17%
In Stock
Free Shipping AvailableFree Shipping
Panasonic ETDLE085 ET-DLE085

Panasonic ETDLE085 ET-DLE085

The Panasonic ET-DLE085 is a short throw zoom lens that is designed for use with Panasonic’s 1-Chip DLP projectors. The lens makes it possible to vary the projection distance by changing the focal distance. NOTE: The lens cannot be ...
$3,449.00 List Price: $4,199.00You Save 18%
Available to Order! Item usually SHIPS in 4 business days
Free Shipping AvailableFree Shipping
Panasonic ETDLE250 ET-DLE250

Panasonic ETDLE250 ET-DLE250

Panasonic's ET-DLE250 is a power zoom lens for the PT-D6000 series and the PT-D5700/PT-DW5100/PT-D4000 series projectors.Panasonic ET-DLE250 Specifications: 2.3 - 3.6:1 (PT-DZ6710/DZ6700)2.4 - 3.8:1 (PT-DW6300)2.4 - 3.7:1 (PT-D6000)
$2,349.00 List Price: $2,799.00You Save 16%
In Stock
Free Shipping AvailableFree Shipping
Panasonic ETDLE450 ET-DLE450

Panasonic ETDLE450 ET-DLE450

The Panasonic ET-DLE450 is a Power Zoom Lens for the PT-D6000 series and the PT-D5700/PT-DW5100/PT-D4000 series.Panasonic ET-DLE450 Specifications: 5.4 - 8.6:1 (PT-DZ6710/DZ6700)5.6 - 9.0:1 (PT-DW6300)5.5 - 8.9:1 (PT-D6000)
$2,349.00 List Price: $2,799.00You Save 16%
In Stock
Free Shipping AvailableFree Shipping
Panasonic ETDLE350 ET-DLE350

Panasonic ETDLE350 ET-DLE350

The Panasonic ET-DLE350 is a zoom lens is designed for use with Panasonic's applicable projectors. This lens makes it possible to vary the projection distance by changing the focal distance. Panasonic ET-DLE350 Specifications: 3.6 - ...
$2,349.00 List Price: $2,799.00You Save 16%
In Stock
Free Shipping AvailableFree Shipping
Panasonic ETPKD130B Projector Bracket Assembly

Panasonic ETPKD130B Projector Bracket Assembly

The Panasonic ETPKD130B is a projector ceiling mount bracket assembly designed for use with most 1DLP projectors. Call your Sales Professional for more information on applications and compatibility.
$229.00
In Stock
Free Shipping AvailableFree Shipping
Panasonic ETDLE055 ET-DLE055

Panasonic ETDLE055 ET-DLE055

Panasonic's ET-DLE055 is a 0.8 fixed focal lens for their PT-D6000 Series and PT-D5700/PT-DW5100/PT-D4000 Series projectors.
$2,749.00 List Price: $3,299.00You Save 17%
Available to Order! Item usually SHIPS in 6-10 business days
Free Shipping AvailableFree Shipping
Panasonic ETDLE150 ET-DLE150

Panasonic ETDLE150 ET-DLE150

The Panasonic ET-DLE150 is an optional power zoom lens designed for use with Panasonic's DLP projectors. This lens allows you to vary the projection distance by changing the focal distance. NOTE: The lens cannot be used by itself. It must ...
$2,349.00 List Price: $2,799.00You Save 16%
Available to Order! Item usually SHIPS in 4 business days
Free Shipping AvailableFree Shipping
Panasonic ETYFB200G ET-YFB200G

Panasonic ETYFB200G ET-YFB200G

Now you can have efficient AV control integration with Panasonic's ET-YFB200G Digital Link Switcher. This device allows seamless control and media distribution to a main projector and sub-display, or where content is transmitted to two ...
$1,679.00 List Price: $1,999.00You Save 16%
Available to Order! Item usually SHIPS in 6-10 business days
Free Shipping AvailableFree Shipping
Panasonic ETUK20 ET-UK20

Panasonic ETUK20 ET-UK20

Panasonic's ET-UK20 upgrade kit with Geometry Manager Pro software supports color matching and ege blending for multi-projector set-ups (up to 32 projectors).  It also allows creative masking using four lines or bitmap ...
Call for price! Not available online.
Panasonic ETYFB100G ET-YFB100G

Panasonic ETYFB100G ET-YFB100G

By combining Panasonic's ET-YFB100G with a DIGITAL LINK-ready projector, video, audio and control signals can be transmitted over a single cable. This simplifies cabling and system upgrades, making it ideal for ceiling-mounted ...
$1,049.00 List Price: $1,299.00You Save 19%
Please call for availability.
Free Shipping AvailableFree Shipping
Panasonic ETPKD130H ET-PKD130H

Panasonic ETPKD130H ET-PKD130H

Panasonic's ET-PKD130H is a high-ceiling projector mount bracket with a 6-axis adjustment mechanism, which is useful for installing the Panasonic ET-ELE030 lens (sold separately ) to applicable projectors, enabling short focal-length ...
$1,149.00 List Price: $1,299.00You Save 12%
Available to Order! Item usually SHIPS in 6-10 business days
Free Shipping AvailableFree Shipping
Panasonic ETPKD120H ET-PKD120H

Panasonic ETPKD120H ET-PKD120H

Panasonic's ET-PKD120H is a high ceiling projector mount for use with their PT-DZ870 Series DLP-based projectors: PT-DZ870K/PT-DZ870LK PT-DW830K/PT-DW830LK PT-DX100K/PT-DX100LK PT-DZ870W/PT-DZ870LW PT-DW830W/PT-DW830LW ...
$599.00
Available to Order! Item usually SHIPS in 16-20 business days
Panasonic ETPKD120S ET-PKD120S

Panasonic ETPKD120S ET-PKD120S

Panasonic's ET-PKD120S is a low ceiling projector mount for use with their PT-DZ870 Series DLP-based projectors: PT-DZ870K/PT-DZ870LK PT-DW830K/PT-DW830LK PT-DX100K/PT-DX100LK PT-DZ870W/PT-DZ870LW PT-DW830W/PT-DW830LW ...
$549.00
Available to Order! Item usually SHIPS in 16-20 business days
Free Shipping AvailableFree Shipping

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information