Product Overview
The Atlona AT-HDVS-150-TX-WP features an HDMI input plus VGA input with 3.5mm audio connector and a two-gang, US two-gang wall plate. Designed as a remote input device for the AT-UHD-CLSO-824 matrix switcher, the AT-HDVS-150-TX-WP combines the benefits of a switcher with built-in auto-switching and the advantages of long-distance HDBaseT signal extension over a single cable. HDMI signals up to 4K/UHD @ 60Hz with embedded audio, VGA input signals up to 1920×1200 video, and control signals can be extended up to 230 feet (70 meters). The switcher enables auto display on/off, auto-switching, along with other features. The switcher receives power from the AT-UHD-CLSO-824 using Power over Ethernet. The AT-HDVS-150-TX fits inside any 40 mm deep two-gang electrical box or mud ring and is ideal for long distance transmission and display control in corporate or educational settings using analog and digital sources.
Atlona AT-HDVS-150-TX-WP Features:
- US, 2-gang wall plate:
- Shallow, 1.5" (40 mm) deep wall plate simplifies integration with recessed RJ-45 connector
- Attractive alternative to table-top boxes for placement near presenter’s station
- 2×1 HDBaseT™ switcher:
- Features an HDMI input plus VGA input with 3.5mm audio connector
- Allows advanced HDMI display devices to be used with legacy VGA sources
- Long distance HDMI extension:
- Transmits AV signals up to 230 ft (70m) @ 1080P and 130 ft. (40m) @ 4K/UHD using CAT6a/7 cable
- Uses easy-to-integrate category cable for low-cost, reliable system installation
- Automatic display control:
- Automatically changes projector power state based on active or standby mode of the switcher (in conjunction with the AT-HDVS-150-RX). Control signals are transmitted via RS-232.
- Eliminates the need for a complex control system in small AVsystems
- Automatic input selection using 5 volt detection:
- Selects active input when sources are connected or if there is a change in source power status
- Eliminates need for complex control system in small AV systems
- Front panel display on/off control:
- Remotely controls display power state; provides alternate ‘Display Mute’ mode
- Eliminates need for manual operation of display or use of IR remote control
- Front panel input select button:
- Overrides auto-switching when two active sources are present
- Simple manual control allows presenter to maintain control of AV system
Atlona AT-HDVS-150-TX-WP Specifications:
- Resolution:
- Video: 4096×2160 @ 24/25/30/50/60Hz, 3840×2160 @ 24/25/30/50/60Hz, 2048x1080p, 1080p @ 23.98/24/25/29.97/30/50/59.94/60Hz, 1080i @ 50/59.94/60Hz, 720p @ 50/59.94/60Hz, 576p, 576i, 480p, 480i
- VESA: 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480
- Color Space: YUV, RGB
- Chroma Subsampling: 4:4:4, 4:2:2, 4:2:0*
- Color Depth: 8-bit, 10-bit, 12-bit
- Audio:
- Analog IN: PCM 2Ch
- HDMI IN & HDBaseT OUT: PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio
- Sample Rate: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
- Bit Rate: up to 24-bit
- Distance:
- CAT5e/6 @ 4K: Up to 115 feet (35 meters)
- CAT6a/7 @ 4K: Up to 130 feet (40 meters)
- CAT5e/6 @ 1080p: Up to 197 feet (60 meters)
- CAT6a/7 @ 1080p: Up to 230 feet (70 meters)
- HDMI IN/OUT @ 4K: Up to 15 feet (5 meters)
- HDMI IN/OUT @ 1080p: Up to 30 feet (10 meters)
- Signal:
- Bandwidth: 10.2 Gbps
- CEC: Yes
- HDCP: 1.4
- Temperature:
- Operating: 32°F to 122°F (0°C to 50°C)
- Storage: -4°F to 140°F (-20°C to 60°C)
- Humidity: 20 to 90% non-condensing
- Power: 18.7W (when paired)
- Dimension: 2 Gang, 1.5" (40mm) deep
- Weight: 0.82lbs (0.37kg)
- Certification: CE, FCC
