Intelix INT-HD70-RX HDMI, IR and RS232 Receiver with PoH

OUR PART #: INT-HD70-RX MFR #: INT-HD70-RX

Copied to clipboard

The Intelix INT-HD70-RX extends HDMI, IR, and RS232 over a single solid core shielded Category 5e or greater cable using the Valens VS010RX HDBaseT chip. ...Read more

Intelix INT-HD70-RX HDMI, IR And RS232 Receiver With PoH Image 1
Intelix INT-HD70-RX HDMI, IR And RS232 Receiver With PoH Image 2
Intelix INT-HD70-RX HDMI, IR And RS232 Receiver With PoH
No longer available at Full Compass
We've left this page up for reference only.

Questions? Contact our
Sales and Service Pros for expert
advice and package pricing.

800-356-5844

Email customer service

Accessories

Product Overview

The Intelix INT-HD70-RX extends HDMI, IR, and RS232 over a single solid core shielded Category 5e or greater cable using the Valens VS010RX HDBaseT chip. The INT-HD70-RX supports a 1080p video signal, including HDCP 2.2 and multichannel audio, up to 70m, as well as 3D and 4K x 2K (UHD) signals up to 40m. Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Flexible power design allows the units to be powered at either the TX or RX end, and only one power supply is required.

The INT-HD70 series extenders are compatible with all Intelix HDBaseT product offerings and any product that meets the HDBaseT specifications.

Intelix INT-HD70-RX Includes:

  • Installation Guide
  • Power Supply
  • 3-pin Removable Screw Terminal

Intelix INT-HD70-RX Features:

  • Extends HDMI, IR, and RS232 over a single solid core shielded Category 5e or greater cable using the Valens VS010TX HDBaseT chip
  • 1080p, including HDCP 2.2 and multichannel audio, up to 70m
  • 3D and 4K x 2K (UHD) signals up to 40m
  • Built-in surge protection and diagnostic LEDs
  • Powered at either the TX or RX end, and only one power supply is required
  • The power supply is included; IR accessories (DIGIB-EMT and DIGIB-EYE) are sold separately
  • Compatible with all Intelix HDBaseT product offerings and any product that meets the HDBaseT specifications

Intelix INT-HD70-RX Specifications:

  • Product Line: INT-HD70-RX\
  • Input/Output Connections:
    • HDMI Output: One (1) HDMI Type A Receptacle
    • HDBaseT Port: One (1) 8P8C port (Shielded RJ45)
    • Power: One (1) 5.5 mm OD, 2.6 mm ID Threaded Barrel
    • RS232 Port: One (1) 3-pin Removable Terminal Block Connector
    • IR Input: One (1) 3.5 mm TRS Receptacle
    • IR Output: One (1) 3.5 mm TRS Receptacle
  • Supported Audio, Video and Control:
    • Video Resolutions:
      • SMPTE: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, UHD/30
      • VESA: Resolutions up to 1920x1200
      • Color Depth: 24, 30, 36, 48bit
    • Maximum Video Compatibility at 70 m: Deep Color 36/30/24 Bit at 1080p
    • Maximum Video Compatibility at 40 m: 1080p 3D, UHD/30, Deep Color 48 Bit at 1080p
    • Video Compliance: HDMI 1.4 and HDCP 1.4/2.2
    • Embedded Audio: Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
    • ARC (Audio Return Channel): No
    • HEC (HDMI Ethernet Channel): No
    • CEC (Consumer Electronics Control): Yes (Pass-through Only)
    • Supported Baud Rates: 2400, 4800, 9600, 19200, 38400, 57600, 115200
    • Supported IR Carrier Frequencies: 33 to 55 kHz
  • HDBaseT Signal Characteristics:
    • Maximum Distance: 70 m (229 ft)
    • Cable Requirements: Continuous shielded solid core Cat 5e or greater with TIA/EIA-568B crimp pattern (no couplers in-line)
    • Bandwidth: 10.2 Gbps
    • HDBaseT Chipset: VS010RX
  • Chassis and Environmental:
    • Construction: Black Alumininum
    • Dimensions (HxWxD): 0.64" x 4.73" x 3.31" (16.2 mm x 115 mm x 84 mm)
    • Operating Temperature: +32° to +104° F (0° to +40° C)
    • Operating Humidity: 20% to 90%, Non-condensing
    • Storage Temperature: +14° to +140° F (-10° to +60° C)
    • Storage Humidity: 20% to 90%, Non-condensing
  • Power and Regulatory:
    • Power Input: 24V DC 1.25A or 48V DC PoH (Power over HDBaseT)
    • Power Output: 48V DC PoH (Power over HDBaseT)
    • Power over Ethernet (PoE) Compatibility: 802.3af Alternative A
    • Power Consumption: 5 watts
    • ESD Protection: 15kV air, 8kV contact
    • Regulatory: FCC, CE, RoHS
  • Other:
    • Warranty: 2 years
    • Diagnostic Indicators: HDCP, Link, and Power
    • Optional Accessories: IR emitter (DIGIB-EMT), IR receiver (DIGIB-EYE), rack mount (INT-EXRMK), rack mounted power supply (PSU12)
    • HDBaseT Transmitter (A/V, PoE, Control) Compatibility: DIGI-HD60C-S, DIGI-HDX-S, FLX-64, INT-HD70-TX, INT-HDX100-TX, DIGI-1X4B-1H, FLX-44, INT-44HDX, INT-66HDX, INT-88HDX, AS-1H1V, AS-1H1V-WP, AS-1H1DP, AS-1H1DP-WP, AS-2H, AS-2H-WP, ASW-WP
    • HDBaseT Transmitter (A/V, Control) Compatibility: FLX-BO4A, DIGI-P123, DIGI-44B, DIGI-88B
    • HDBaseT Transmitter (A/V and PoE) Compatibility: DIGI-HD60-S, DIGI-HD60-WP-S

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Product Documents

Click to download