Mesa Boogie CLEARLINK-SEND CLEARLINK SEND

Mesa Boogie's CLEARLINK™ (SEND) LINE DRIVER is designed to compensate for losses in Tone due to increased capacitance in long cable runs. With a high quality buffer and +12dB of available output gain, it has the ability to drive cable runs of up to 330 Ft./100M before noticeable degradation, when added in-line on the feed from Pedal Board to Amplifier. When combined with a STOWAWAY™ INPUT BUFFER on the Instrument, the CLEARLINK SEND forms an “Effects Loop” for the Instrument-Pedal Board-Amp signal chain that will reclaim the integrity of your sound through boosted levels and buffering or impedance matching. Whether used by itself, or with the STOWAWAY as a comprehensive “Front End” solution, it will provide the needed “stable impedance source” to ensure the pieces in your rig “communicate” well.

Mesa Boogie CLEARLINK SEND Features:

• Made in Petaluma, California with the World’s Finest Materials
• High-Speed, Low Noise Op-Amp based Line-Driver Circuit
• RFI Filtering minimizes radio-frequency interference and noise
• Provides Balanced or Unbalanced Output capable of driving long cable runs and provides amp with a resolute source
• Output Level Control - Adjusts the Output Level of the integrated line-driver circuit, from Unity to +12dB.
• Balanced XLR Output – Drive cable runs up to 330ft with unsurpassed noise immunity and signal integrity.
• Unbalanced ¼” Output - Drive long ¼” cable runs direct to your amp’s input
• On/Off Status LED
• 9VDC External Power Jack Input (power supply not included)
• 9VDC THRU - Passes the power received at the 9VDC IN jack onto a MESA® Stowaway™ Input Buffer

Mesa Boogie CLEARLINK SEND Specifications:

• Input Impedance: 1M Ohm
• Output Impedance: 150 Ohm Unbalanced / 300 Ohm Balanced
• Output Buffer Design: High-Speed, Low Noise Op-Amp
• Nominal Operating Voltage: 9VDC
• Maximum Operating Voltage: 12VDC
• Typical Current Draw: 10mA @ 9VDC
• DC Adapter (sold separately): WARNING!!! To avoid immediate damage and voiding the warranty, the External Power Supply MUST be 9VDC with a NEGATIVE CENTER and a 2.1mm x 5.5mm Barrel Plug.
• Weight: 0.425 lbs (193 g)
• Dimensions (WxDxH): 3.86" x 2.48" x 1.71" (98 x 63 x 44 mm)