Mesa Boogie CLEARLINK-RECEIVE Pedal, Line Driver

Meas Boogie's CLEARLINK RECEIVE ISO/CONVERTER is ideal for stages where instrument signals must travel longer than 15 to 20 feet. It's most common application is receiving a buffered signal through long cabling from its companion product - the CLEARLINK SEND - at the tail end of a Pedal Board and converting the XLR balanced signal that transmits back to a 1/4" unbalanced signal appropriately mached for feeding an instrument amplifier.

The CLEARLINK RECEIVE is also well suited for the studio by enabling a very long cable run from the Control Room to the Cutting Room where an amplifier may be mic'd.

Mesa Boogie CLEARLINK RECEIVE Features:

• Made in Petaluma, California with the World’s Finest Materials
• Passive Design
• High Quality Jensen Audio Isolation Transformer
• Combination XLR/¼” Input accepts Balanced (XLR &TRS ¼”) or Unbalanced (TS ¼”) Inputs
• High-Performance Balanced to Unbalanced Signal Converterfrom drive-lines up to 330 ft away
• ¼” Unbalanced Output is electrically isolated from the input, via the specially designed and shielded isolation transformer.
• Phase Switch - Inverts (reverses) the phase of the output signal in relation to the input signal.
• Ground Switch - Safely lifts (isolates) the ground connection between the IN and OUT jacks, eliminating ground loop hum and noise.

Mesa Boogie CLEARLINK RECEIVE Specifications:

• Maximum Input Level: +16dBu
• Frequency Response: 20Hz - 20kHz (-1dB)
• Total Harmonic Distortion: 0.002% (1kHz, +4dBu)
• CMRR (Common-Mode Rejection Ratio): 120dB (Bal. 60Hz,+4dBu)
• Weight: 0.512 lbs (232 g)
• Dimensions (WxDxH): 3.86" x 2.48" x 1.71" (98 x 63 x 44 mm)