Lectrosonics HMa Digital Hybrid Wireless Plug-On Transmitter

The Lectrosonics HMa plug-on transmitter design will match any microphone or line level source with a standard XLR connector. Phantom power is selectable at 5, 15 and 48 volts, or can be turned off for use with dynamic microphones and line level signal sources.

The design includes a wide tuning range of up to 76MHz, with tuning steps in increments of 100kHz or 25kHz for up to 3072 frequencies. The tuning range covers three standard 25.6MHz Lectrosonics frequency blocks. Each of the standard blocks includes 256 different pilot tone frequencies for compatibility with all Digital Hybrid Wireless receivers.

DSP compatibility modes are also included to work with legacy Lectrosonics analog wireless microphone receivers and IFB receivers, as well as some receivers from other manufacturers.

Includes:

• Two "AA" Alkaline Batteries
• HM Pouch (Part #PHTRAN3)
• Quickstart Guide

Features:

• Accepts microphone or line level signals
• Selectable 5, 15, 48 volt phantom power
• 76MHz tuning range in 100kHz or 25kHz steps for up to 3072 frequencies
• Selectable 50 / 100mW output power
• Adjustable low frequency roll-off
• Powered by two "AA" batteries
• USB port for firmware updates
• IR (infrared) port for fast setup
• Solid machined aluminum housing