Attero Tech unD4O 4-Channel Output Interface, PoE or 24 VDC

Powered by either external +24 VDC or any PoE network switch, the unD4O Dante interface is a 4-output, cost-effective way to add up to 4 analog output channels to an existing Dante-based networked audio system. It's small form factor and PoE power capability make it easy to locate Dante connectivity wherever it's needed - near the audio sink - thereby eliminating costly and interference prone analog wiring.

Please note: with the firmware release (v4.5.0), all unD4O units utilizing the UltimoX chip now support AES67 networked audio. AES67 can be enabled within Dante Controller.

Applications

• Addition of analog outputs where analog cabling would be expensive or is not available back to a central rack
• Network enable analog input power amplifiers or powered speakers
• Analog outputs from Dante-only microphones, like the Shure MicroFlex Series Wireless, or the Audio Technica ATND971 boundary microphone or ATND8677 microphone desk stand
• Multi-point network audio distribution

Includes

• (1) unD4O
• (4) 3-position Phoenix plug connectors

unD4O Key Features

• Support DDM (Dante Domain Manager)
• Supports AES67 interoperability mode
• Small form factor, can be unobtrusively located near analog input devices in systems with Dante audio infrastructure
• (4) balanced line-level analog outputs driven from 4 Dante channels within up to 2 different Dante™ audio flows
• Maximum output level of +20 dBu (+20 dBu = 0 dBFS in the digital domain)
• Power, Sys, Error, and Sync LEDs on the front panel for easy network troubleshooting
• PoE powered to work with any compliant 802.3af PoE network switch or mid-span injector, external +24 VDC supply

Specifications

• Note: specifications and further information can be found within the items located under the "Documentation" tab above.