Radial Engineering Twin Servo Mic Preamp, Jensen 990 Opamp, Dual Jensen Transformers

OUR PART #: TWIN-SERVO

Copied to clipboard

The Radial Engineering Twin-Servo is a microphone preamplifier with a wide frequency response from 0.5 Hz to 150 kHz. ...Read more

Radial Engineering Twin Servo Mic Preamp, Jensen 990 Opamp, Dual Jensen Transformers Image 1
Radial Engineering Twin Servo Mic Preamp, Jensen 990 Opamp, Dual Jensen Transformers
No longer available at Full Compass
We've left this page up for reference only.

Questions? Contact our
Sales and Service Pros for expert
advice and package pricing.

800-356-5844

Email customer service

Product Overview

The Radial Engineering Twin-Servo is a microphone preamplifier with a wide frequency response from 0.5 Hz to 150 kHz. Features include a convenient front-panel Neutrik combo connector with choice of XLR and ¼” inputs, a dual-gang potentiometer for level adjustment along with a 10 segment LED meter for signal management. This is supplemented with a 180º polarity reverse switch that toggles the absolute phase, a gentle high-pass filter to eliminate excessive resonance, a -15dB pad to prevent overload, and a 48V phantom power activation switch.

Radial Engineering Twin-Servo Features:

  • Exceptionally wide frequency response from 0.5 Hz to150 kHz
  • Twin-servo topology eliminates capacitors in the signal path
  • Virtually zero phase shift or bandwidth limitation
  • Oversized Jensen transformers for maximum headroom

Radial Engineering Twin-Servo Specifications:

  • Circuit type: Two stage variable gain all discrete using original Deane Jensen circuit with IC DC servo. Jensen transformer coupled input and output.
  • Frequency response: 14 Hz to 85 kHz / 8Hz to 100kHz (+/- 1 dB / +/- 3 dB)
  • Total harmonic distortion: 0.004%
  • Dynamic range: 91 dB
  • Input impedance - XLR: 1.3 kOhm
  • Input impedance - instrument: 220 kOhm, unbalanced
  • Output impedance: 75 Ohm
  • Maximum output: +22 dBu
  • Mic preamp gain: +60 dB
  • Common mode rejection (CMRR): -72 dB
  • Equivalent input noise (EIN): -120 dBu @ maximum gain
  • Total Harmonic Distortion (THD+N): 0.004%
  • Intermodulation distortion: 0.004%
  • Power: 110mA
  • Phantom power: 48 VDC - 10 mA (as supplied by 500 frame)
  • High pass filter: 6 dB/octave @ 150Hz
  • Construction: 500 Series module
  • Size: 5.25" x 1.5" x 7" (134 x 38 x 178 mm)
  • Weight: 1.75lb (0.79 kg)
  • Shipping size: 6.75" x 1.875" x 9" ( 171 x 48 x 229 mm)
  • Shipping weight: 2.20lb (0.997 kg)
  • Conditions: For use in dry locations only between 5°C and 40°C

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.