Atlas IED I8SCM+ 8" In-Wall/In-Ceiling, PoE+ Indoor IP Loudspeaker System With LED Display And Microphone

AtlasIED I8SCM+ is an indoor wall mount IP loudspeaker with integrated talkback microphone and LED display. It leverages VoIP communication to extend tele-presence with enhanced audio for environments where network-wide communication is desired and high-output loudspeakers are required to overcome high ambient noise and/or large spaces.

AtlasIED I8SCM+ registers as a communication endpoint directly within InformaCast, GCK, and SA-Announce advanced notification applications, supporting audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded & scheduled announcements, while leveraging the WAN or LAN network architecture.

When used within a Cisco environment, the I8SCM+ loudspeakers can join Cisco’s Unified Survivable Remote Site Telephony (SRST) as a supported device. Cisco’s SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination of phones and loudspeakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).

Where 3rd party notification applications are not required, the I8SCM+ loudspeakers can register as SIP devices directly to a SIP server or VoIP Communications Manager for critical alerts, intercom and public address applications.

Under Title II of the ADA, all state and local governments are required to take steps and ensure effective communication to people with disabilities. The AtlasIED I8SCM+ IP loudspeakers with talkback microphone and LED display provide effective communication for all individuals.

AtlasIED I8SCM+ Features:

• 2 General Purpose Inputs
• 1 Relay Output (2A @ 30 VDC)
• Phone/Night Loud Ringer
• External Power Supply Option
• (8) 64 LED Display for Clock or Scrolling Text
• Integrated Microphone Allows for Half-Duplex or Full-Duplex Paging

AtlasIED I8SCM+ Specifications:

• System:
  • Type: PoE+ Indoor IP Loudspeaker System with LED Display and Microphone
  • Operation Mode: Self Powered
  • Indicators: Network Status (On Back)
  • Operating Range (-10db): 70 Hz - 15.5 kHz
  • Frequency Response (+/- 5dB): 86 Hz - 15.5 kHz
  • Vertical Coverage: 105° 800 Hz - 4 kHz Horizontal Coverage: 105° 800 Hz - 4 kHz
  • Directivity Factor (Q): 4.7 @ 2 kHz
  • Max SPL at 1 m (passive): 106 dB SPL Continuous / 109 dB SPL Peak
  • Recommended Signal Processing: Built-In Processing
  • General Purpose Interface: Two Trigger Inputs / One Relay Output (2A @ 30 VDC)
• Display:
  • Display Type: LED Display
  • Display Color Range: Red Only
  • Display Lumens: 162 lux
  • LED's Per Character: 16 X 64
  • Character Max Height: 2.125" (54mm)
  • Viewable Dimensions (H x W): 10.125 x 2.5625" (257 x 65 mm)
  • Control Time via NTP - Text Controlled via Software
• Enclosure:
  • Color: White (RAL 9010)
  • Grille Material: Powder Coated Steel, White Finish, Paintable
  • Baffle Material: 18-gauge Corrosion-Resistant Zinc Plated Steel
  • Mounting/Rigging Provisions: Mounting Enclosure is Not Included (See Optional Enclosure)
  • Safety Agency Ratings: ETL Listed to Comply with UL-60950-1, and CAN/CSA-C22.2 No. 60950-1
  • Ingress Protection: IP-30
  • Logo: Blue and Removable
  • Product Dimensions (HxWxD) 14.38 x 12.88 x 2.77" (365 x 327 x 70.36 mm)
  • Shipping Dimensions (HxWxD) 14.56 x 13.19 x 4.5" (369 x 335 x 114 mm)
  • Net Weight: 4.82 lbs (2.2kg)
  • Shipping Weight: 6 lbs (2.7kg)