Shure ANI4IN-BLOCK 4-Channel Dante Audio Network Interface, 6-Pin Block Inputs

The Shure ANI4IN Audio Network Interface converts up to four line / mic analog signals onto a Dante network for easy audio routing and browser-based control.

Shure ANI4IN Features:

• Single Ethernet port carries Dante audio, power (PoE – class 0)
• LEDs indicate device status and audio signal
• Control strings for third-party preset controllers including Crestron® and AMX®
• 4 Band C/S PEQ on every channel
• Provides channel summing to combine input signals and send them over a single Dante™ channel
• Browser-based software control for all device parameters, per input channel:
  • Preamp gain
  • Mute control
  • Digital gain
  • Polarity control
  • Phantom power
• 1/3 Rack unit wide
• Chassis ground screw (BLOCK version only) provides common chassis ground for multiple inputs
• Block connector (audio + logic)

Shure ANI4IN Specifications:

• Inputs: Four 6-pin block connector
• Phantom Power: +48 V
• Logic Connections (Block connectors only):
  • Sent as Ethernet command strings
  • LED, Switch
• Polarity: Non-inverting, any input to any output
• Output: (1) RJ45
• Power Requirements: Power over Ethernet (PoE), Class 0
• Power Consumption: 10W, maximum
• Weight: 1.5 lbs (672 g)
• Dimensions (HxWxD): 1.6" x 5.5" x 5.0" (4 x 14 x 12.8 cm)
• Control Application: HTML5 Browser-based
• Temperature:
  • Operating Temperature Range: 20°F - 104°F (-6.7°C - 40°C)
  • Storage Temperature Range: -20°F - 165°F (-29°C - 74°C)