Product Overview
The world's most powerful Ethernet to DMX512 converter, Enttec's Storm 24 is a high density device made for when you need to convert large amounts of DMX Over Ethernet data into DMX512, yet keep costs under control. It works great for any LED pixel-mapped project or for large traditional rigs. It takes up 1U of rack space and provides you with 24 Universes of DMX 512.
Applications
- University / professional theatres
- Architectural installations
- Touring companies / road houses
- Performing Arts Centres
- Trade shows
Includes
- Storm 24 unit (pn: 70050)
- Straight connect Ethernet lead (pn: 79102)
- IEC power cord (country dependent plug)
- User manual (pn: 50479)
- CD (pn: 79106)
Features
- Terrific Value: Its ground-breaking per port system cost makes DMX conversion no longer a high-cost item in your pixel mapping budget. Cabling costs are also lowered with RJ45 outputs, so you can use standard crimp connectors rather than the more expensive XLR connectors. Needing only 1U means you also save on rack space.
- Remarkable Performance: Employing state of the art FPGA programmable Logic, Gigabit ethernet, and ultra fast DDR memory, all 24 DMX outputs are synchronized within 100us when in Sync mode, so you'll get no more image ghosting or jumpy updates of your content. No other device performs at this level.
- Easy Cabling: This unit eases cabling and offers lower costs by using standard RJ45 outputs, so although XLR connectors may be widely used in the entertainment world, when your project isn't regularly traveling the world, RJ45s connectors can provide the best price/performance ratio. Connecting your whole system using standard shielded CAT5 cable also helps keep the per port cost down. Storm 24 uses the standard ANSI E1.27-2 specified RJ45 pinout to ensure most equipment connections will be simple.
- Multi-Protocol Support:
- ArtNet 1
- ArtNet 2
- ArtNet 3
- sACN
- ESP
- Input/Output:
- (24) DMX512 output ports on RJ45
- (1) Gigabit Ethernet port
- Jumbo Frame support
- (1) RS232 input for profile selection via serial command
- Compatible Apps:
- E.L.M ENTTEC LED Mapper (Windows)
- D-PRO (Windows , Mac)
- Luminair (iOS)
- Madrix (Windows)
- Jinx! LED Matrix Control (Windows)
- LightJams (Windows)
- Elios (Windows, Mac & Linux)
- LightingPad (iOS): ... and all other Art-Net and/or sACN supported Apps
Specifications
- Input Voltage: 90 – 260V AC
- Input Frequency: 50/60Hz
- Physical:
- Dimensions: 18.25" L x 5" W x 1.72" H (463.1 x 111 x 43.6mm)
- Weight: 3.96 lbs (1.8 kg)
- Shipped weight: 5.78 lbs (2.6 kg)
- Op Environment: 0°-50°C
- Connectors:
- 24 DMX Output (RJ-45) Ports
- 1x RJ45 ethernet connector
- 1x RS232 connector
- 2x USB host connector (un-used)
- Power Consumption: 15 to 20 W
- Certification: CE, FCC certified
