Product Overview
The Ashly NE24.24M is a matrix processor that uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output 4 channels of DSP processing at a time. These cards are easily installed in the field without the need to reprogram the device.
Matrixing allows you to route any input to any output and control individual levels once they have been assigned. Fixed path architecture and extensive processing power per channel will reduce the amount of time it takes to set up your system.
An optional GPO Logic Card allows the ne24.24M to trigger projection screens, curtains or lights. The logic card is installed in place of a 4-input or 4-output card and occupies one of the four expansion slots.
Ashly ne24.24M Features:
- 10/100 Ethernet and RS-232 computer interface is standard
- Extensive DSP Available
- Easy and intuitive user interface
- Mic/Line inputs
- 24-bit A/D–D/A audio resolution
- 24-bit/150 MHz DSPs
- Up to 24 channels of audio processing
- 4x4 base unit configuration
- Expand inputs or outputs 4 channels per module
- Modules easily field installable
- Euroblock connectors for audio, preset recall, DC remote level control and data in/out
- 31 preset locations
- Four dedicated remote controls for Level, Preset Recall and Programmable Functions
- Third Party Control Friendly
- Input and output metering viewable in dBu
- Multi-level Security
- Five year worry-free warranty
- Safety/Compliance: (FCC, CE, RoHS)
- Rear panel:
- 10/100 Ethernet port
- RS-232 Port
- Euroblock inputs
- Euroblock outputs
- Remote level control
Ashly ne24.24M Specifications:
- Input:
- Active Balanced, 18 kOhm
- MaxInput Level: +20 dBu
- Input Gain Range: -50 dB to +12 dB, polarity select
- Output:
- Active Servo-Balanced, 112 Ohm
- Max Output Level: +20 dBu
- Output Gain Range: -50 dB to +12 dB, polarity select
- Frequency Response: 20 Hz-20kHz, +/- 0.25 dB
- THD: < 0.01% @1 kHz, +20 dBu
- Dynamic Range: > 110 dB (20 Hz-20 kHz) unweighted
- Output Noise: < -90 dBu unweighted
- Mic Preamp:
- Gain: 0dB, +20dB, +40dB, +60dB
- Phantom Power: +48VDC, 9.6mA max, soft on/off
- Equivalent Input Noise: -128 dBu, 20-20 kHz, 50 Ohm source
- Signal Generator:
- White Noise, Pink Noise: 0dB
- Eq Filters:
- Number: 15 per Input, 15 per Output
- Selectable As:
- Parametric:
- Bandwidth: 1/64th Octave to 4 Octave
- Range: +15/-30 dB, 0.1 dB increments
- Frequency Resolution: 1 Hz
- Low-Shelf:
- Slope: Selectable 6 or 12 dB/Octave
- Frequency Range: 20 Hz to 2KHz
- Range: +/-15 dB, 0.1 dB increments
- High-Shelf:
- Slope: Selectable 6 or12 dB/Octave
- Frequency Range: 3.886KHz to 20KHz
- Range: +/-15 dB, 0.1 dB increments
- All-Pass:
- Type: Second Order (-180 degrees)
- Frequency Range: 20 Hz to 20 KHz
- Crossover Filters:
- High Pass Filter:
- Type: Linkwitz-Riley, Bessel, Butterworth
- Slope: 12,18, 24 and 48 dB/Octave
- Frequency Range: Off to 20 KHz, 1 Hz increments
- Low Pass Filter:
- Type: Linkwitz-Riley, Bessel, Butterworth
- Slope: 12,18, 24 and 48 dB/Octave
- Frequency Range: Off to 20 Hz, 1 Hz increments
- Delay:
- Input Maximum Delay: 682.5 ms
- Increment: 20 µs
- Output Maximum Delay: 682.5 ms
- Increment: 20 µs
- Gate:
- Threshold: -80 to +20dBu, 1dBu increments
- Floor: Off, -80 to 0dBu, 1dBu increments
- Attack: 2, 0.5, 1, 2, 5, 10, 20, 50ms/dB
- Release: 5, 10, 20, 50, 100, 200, 500, 1000ms/dB
- Autoleveler:
- Target Level: -40 to +20dBu, 1dBu increments
- Ratio: 1.2:1, 1.5:1, 2:1, 3:1, 4:1, 6:1, 10:1
- Hold Time: 0, 1, 2, 3, 4, 5, 6 Sec
- Threshold Below Target -30 to 0dB, 1dB increments
- Gain Increase Rate: 5, 10, 20, 50, 100, 200, 500, 1000ms/dB
- Gain Decrease Rate: 5, 10, 20, 50, 100, 200, 500, 1000ms/dB
- Ducker:
- Trigger Threshold: -80 to +20 dBu,1dBu increments
- Ducker Depth: Off, -30 to 0 dB, 1dBu increments
- Ducker Release: 5, 10, 20, 50, 100, 200, 500, 1000ms/dB
- Cross Point Mixer:
- Gain: -Inf, -50 to +12dB, 1dB increments with Mute
- Compressor/Limiter:
- Threshold: -20 dBu to +20 dBu, 1 dB increments
- Ratio: 1.2 :1 to Infinity (1.2, 1.5, 2, 3, 4, 6, 10, 20, Infinite:1)
- Attack: 0.5 ms to 50 ms per dB
- Release: 10 ms to 1sec. per dB
- Processor:
- Input A/D: 24 bit
- Output D/A: 24 bit
- Processors: 24 bit signal, 48 bit filters, 56 bit accumulator
- Sample Rate: 48 kHz
- Propagation Delay: 1.46 ms
- Other:
- Power Requirements: 90 - 240VAC, 50-60 Hz, 40W
- Shipping Weight: 13 lbs (5.9 kg) max
- Dimensions: 19" L x 3.5" H x 8.5" D (483 x 89 x 216 cm)
- Connections: Euroblock
- Environmental: 40-120 deg. F, (4-49 deg, C) non-condensing
- General Purpose Logic Output Option:
- Output Source Current Per Channel: 10 mA
- OutputVoltage: +12VDC
- Output Supply Current: 100 mA
- Output Sink Current PerChannel: 100 mA
- Preset Recall
- Data in and out ports
