Product Overview
A 4-track recorder designed for installation, the Tascam SD-20M is a 1U rack-mount unit that includes a pair of microphone preamps with phantom power for direct microphone recording. Both the mic and the line inputs can be simultaneously recorded in 4-track mode. The dual-mode captures a copy of your audio at a lower level, as insurance against distorted takes. Additionally it includes a battery backup system: AA batteries can keep recording for hours in case of a power loss. A wired remote or footswitch can be connected to control recording and playback. Plus variable-speed playback allows the playback to be changed without the pitch being affected.
Includes
- SD-20M unit
- AC adapter
- Rack-mount screw kit
- Owner's manual
- Warranty card
Features
- 4-track solid-state recorder
- Stereo or 4-track recording (2 mic/line inputs and 2 line inputs)
- Two microphone inputs on XLR/jack combo jacks,compatible with +4dBu line level, switchable phantom power (+ 48V)
- Two RCA line inputs on rear side for tracks 3-4(compatible with -10dBV line level
- Two recording formats supported:
- WAV/BWF: 44.1-96kHz, 16-/24-bit
- MP3: 32 - 320kbit/s
- Simple user interface
- Low-cut filter with 3 levels (40 / 80 / 120Hz)
- File divide feature
- Dual recording function records a copy of your audio at a lower level for a distortion-proof safety track
- Variable speed playback changes speed without changing the pitch (0.5 times to 1.5 times in 0.1 increments)
- Auto-recording function to automatically start recording based on input level
- CA stereo line outputs
- Standard stereo headphones output
- Remote jack for wired or footswitch control
- AA battery backup - keeps recording even after power loss
- SDXC media slot supports cards up to 128GB
- Compact 1U rack-mountable chassis
Specifications
- Recording media
- SD card (64MB to 2GB),
- SDHC card (4GB to 32GB),
- SDXC card (48GB to 128GB)
- File format: WAV / BWF
- Sampling frequency: 44.1k / 48k / 96kHz
- Quantization bit rate: 16 / 24-bit
- MP3
- Sampling frequency: 44.1k / 48kHz
- Bit-rate for recording: 32k to 320kbps
- Number of channels: 4-channel (2 Stereo)
- Analog audio inputs
- BALANCED
- (MIC/LINE INPUT1/2) *
- Front panel Connector: XLR-3-31 / 1/4"
- (6.3mm) TRS combo jack × 2 (1: GND, 2: HOT, 3: COLD)
- LINE
- Input Impedance: 10kΩ
- Standard input level: +4dBu
- Minimum input level: –12dBu
- Maximum input level: +20dBu
- MIC XLR : Phantom power compatible
- Input Impedance: 2.7kΩ
- Minimum input level: -67dBu (GAIN at ”High”)
- Maximum input level: 0dBu (GAIN at ”Low”)
- UNBALANCED (INPUT 3/L / 4/R) * Rear panel
- Connector: RCA Pin jack × 1 pair
- Input Impedance: 10kΩ
- Standard input level: –10dBV
- Minimum input level: –26dBV
- Maximum input level: +6dBV
- Analog audio outputs
- UNBALANCED Connector: RCA Pin jack × 1 pair
- Output impedance: 200Ω
- Standard output level: –10dBV
- Maximum output level: +6dBV
- REMOTE
- Connector: 2.5mm TRS jack × 1
- PHONES
- Connector: 1/4" (6.3mm) Stereo phone jack × 1
- Maximum output level: 20mW + 20mW or more (32Ω loaded, THD+N:less than 0.1%)
- Power: AC adapter (TASCAM PS-P1220E),
- 4 AA batteries
- Power consumption: 5W (Max)
- Dimensions (W×H×D) 19.0" × 17.4" × 11.8" / 483 × 45 × 299.6 mm
- Weight 6.0lbs. / 2.7kg (excluding batteries)
- Operating temperature 41˚F to 95˚F / 5˚C to 35˚C
- Audio performance
- Frequency response:
- 20Hz to 20kHz +1dB/–3dB (INPUT1-2 to OUTPUT, Fs 44.1k/48kHz, JEITA)
- 20Hz to 40kHz +1dB/–3dB (INPUT1-2 to OUTPUT, Fs 96kHz, JEITA)
- Distortion: 0.01% or less (JEITA)
- S/N ratio: 100dB or more (JEITA)
- Dynamic range: 100dB or more (JEITA)
- Crosstalk: 100dB or more (JEITA)