Product Overview
The K-Array KA24 is an all-in-one KA amplifier and processing solution. It features 4 channels per 500W on 4 Ohm. The KA24 also has 4 fully independent and configurable channels.
The KA24 can be used as a mixer for fixed installations because it has the microphone and Phantom power options available on every analog IN. 2 GPIO ports give easy external analog controls using K-array accessories.
K-Array KA24 Features:
- 2000W in 2 rack units
- 4 analog IN and 2 AES-EBU IN to 4 fully configurable OUT
- 2 GPIO for external analog controls
- Integrated DSP with processing, matrix and delays
- Onboard touch screen for easy access functions
- Mic IN and 48V option on all IN for mixer application
K-Array KA24 Specifications:
- Power Output:
- Max Power @ 4 Ohms: 4 x 600 W
- Max Power @ 8 Ohms: 4 x 300 W
- Max Power bridged @ 8 Ohms: 2 x 1200 W
- Minimum impedance: 4 Ohms (single channel mode), 8 Ohms (bridge mode)
- Audio Specs:
- Distortion (THD + N): < 0.09% 1W to full power @ 4 Ohms (typically < 0.05 %)
- Input impedance: 10 k Ohms balanced
- Gain: 26 dB
- Output: Unbalanced to ground
- Bandwidth: 20 Hz - 20 kHz (+/- 1 dB)
- Damping factor: > 10000 @ 100 Hz
- Protection:
- Thermal: Yes
- Short circuit / over-load: Yes
- Clip limit, Analog signal limit: Yes
- Audio Input:
- Analog Connectors: 4 male + 4 female 3-pin balanced XLR
- Digital Connectors: 1 male + 1 female 3-pin XLR
- Remote control Input:
- Connectors: 1 male and 1 female XLR parallel / 1 USB B Jack serial converter
- Audio powered Output:
- Connectors: 2 x 4-pin Speakon NL4
- AC power:
- Connector: 2 x PowerCon IN/OUT
- Nominal voltage: 100 - 240 V, 50/60 Hz with PFC
- Operating Range: AC 90 - 264 V
- Efficiency: > 79 % (typical)
- 1/8 rated power (pink noise)@ 8Ohms: 440 VA
- Certification:
- Physical:
- Dimensions: 17" x 12" x 4“ (430 x 295 x 94 mm)
- Weight: 12.12 lbs (5.5 kg)