Focusrite Pro RedNet AM2 Stereo Headphone / Line Output Interface for Dante Audio Network

OUR PART #: AM2-FOCUSRITE MFR #: AMS-REDNET-AM2

Copied to clipboard

The Focusrite Pro RedNet AM2 is a compact... ...Read more

Focusrite Pro RedNet AM2 Stereo Headphone / Line Output Interface For Dante Audio Network Image 1
Focusrite Pro RedNet AM2 Stereo Headphone / Line Output Interface For Dante Audio Network Image 2
Focusrite Pro RedNet AM2 Stereo Headphone / Line Output Interface For Dante Audio Network
No longer available at Full Compass
We've left this page up for reference only.

Questions? Contact our
Sales and Service Pros for expert
advice and package pricing.

800-356-5844

Email customer service

Product Overview

The Focusrite Pro RedNet AM2 is a compact, flexible Dante-compatible stereo monitoring unit combining headphone and line outputs for monitoring of signals from the Dante network wherever required. RedNet AM2 features a 1/4" front-panel TRS headphone socket plus a pair of rear-mounted balanced line outputs with male XLR connectors for loudspeaker monitoring and other applications.

Designed to drive high or low impedance headphones at high levels, the headphone output delivers significant audio output power. The compact unit, mounted in an enclosure based around a sturdy road-worthy aluminium extrusion, is fitted with non-slip feet, and can either sit securely on a flat surface or be mounted on top of a mic stand using the standard threaded bush incorporated in the base.

Dual locking ethercon connectors are included to connect the network and to daisy-chain to additional network devices. The unit is powered via Power over Ethernet (PoE) or via the rear-panel barrel connector and included DC power supply.

Features:

  • Stereo line output and headphone for Dante audio-over-IP networks
  • Power-over-Ethernet supplied: IEEE802.3af compliant
  • Up to 24-bit, 96kHz sampling rates
  • Robust steel and aluminium chassis
  • Powerful headphone output even with high-impedance headphones
  • Up to 24dBu line output levels
  • Independent level control of headphone and line outputs
  • Mute switch for line output
  • Mic stand mount
  • Kensington security slot
  • Integrated network switch allowing daisy-chaining of network devices

Specifications:

  • Line Level Outputs:
    • 0dBFS Reference Output Levels: 18 or 24dBu (switchable)
    • Frequency Response Output: 20Hz - 20kHz ±0.05dB
    • THD+N Output: < -100dB (0.001) unweighted, 20Hz - 20kHz; -1dBFS input
    • Dynamic Range: 120dB A-weighted (typical), 20Hz - 20kHz
  • Crosstalk:
    • Output to Output: < -100dB unweighted, 20Hz - 20kHz; -20dBFS input
  • Headphone Output:
    • 0dBFS Reference Levels Headphones: 19dBm
    • Headphone Frequency Response: 20Hz - 20kHz ±0.05dB
    • Headphone THD+N: < -100dB (0.001) unweighted, 20Hz - 20kHz; -1dBFS input
    • Headphone Dynamic Range: 118dB A-weighted (typical), 20Hz - 20kHz
    • Output Impedance: 5Ω
    • Headphone Impedance: 32 - 600Ω
  • Digital Performance:
    • Supported Sample Rates: 44.1 / 48 / 88.2 / 96kHz (-4 / -0.1 / 0.1 / 4.167) at 24-bit
    • Clock Sources: Internal or from Dante Network Master
    • Minimum Latency: 1ms
  • Front Panel Connectivity:
    • Headphone Outputs: 1 x 1/4" stereo jack
    • Line Outputs: 2 x Male XLR
    • PSU (PoE and DC): 1 x PoE (Port 1) Input and 1 x DC12V Barrel Input Connector
    • Network: Green LED: Indicates device is network master or network slave, shows valid network lock
  • Rear Panel Connectivity
    • Top Panel Indicators
    • Power: LED illuminates Green when PoE is connected and Red when DC power is connected
    • Signal: Signal indicator LED for both network input channels
    • Mute: Red LED
    • Control Functions: 2 x Pots
  • Dimensions:
    • Height:
      • Chassis Only: 1.89" (48mm)
      • Including Pots and Feet: 2.28" (58mm)
    • Width: 5.51" (140mm)
    • Depth:
      • Chassis Only: 4.19" (106.5mm)
      • Including Connectors: 4.57" (116mm)
    • Weight: 0.81kg
  • Power:
    • Power over Ethernet (PoE): Complies with IEEE 802.3af class 0 Power-over-Ethernet standard
    • DC Power Supply: 1 x 12V 1.2ADC Power Supply
    • Power Consumption: PoE: 11.0W - DC: 9.8W
    • Operating Temperature: Operates at up to an ambient temperature of 50°C

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Product Articles