Product Overview
The VC-Grid 60 is an ultra-light-weight LED video module with a 60 mm pixel pitch. Useful in creating customized LED video solutions with maximum artistic flexibility and a minimum of effort, the VC-Grid’s compact size makes it extremely suitable for integration into stage designs, set elements, creative ceilings, lobbies and much more. Used with or without a front diffuser, multiple VC-Grids can be combined in a countless variety of ways for ultimate design freedom. A combined power/data cable allows VC-Grids to be daisy-chained for easy setup and less cabling.
Martin Professional VC-Grid 60 Features:
- Wide range of pixel pitches to suit every application
- Easy cabling, mapping and configuration
- Bright and fully calibrated for optimal consistency
- 64/16 individually controllable pixels
- 750 nits of brightness
- High-quality 16-bit per color image processing technology
- Pixel-level brightness and color calibration for optimal image quality
- P3/DMX controllable (automatic protocol detection)
- Intuitive mapping and addressing via P3 System Controller
- Combined power/data input (single cable for power and data input)
- Combined power/data thru (to daisy-chain multiple VC-Grids)
- Supported by integrated power and data processor (P3 PowerPort 1500) and simple cabling system
- Custom designs available on request (pixel pitch and module dimensions)
Martin Professional VC-Grid 60 Specifications:
- Physical:
- VC-Grid 8x8 60™ (LxWxH): 18.9"x 18.9"x 0.6" (480 mm x 480 mm x 15 mm)
- Weight: 1.1 lbs (500 g)
- Control and Programming:
- DMX channels, 8x8 model: 192 (pixel mode) or 3 (module mode)
- Setting and addressing: P3 System Controller or RDM-compliant controller
- Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
- Color and intensity calibration: Pixel-level
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
- Firmware update: Via P3 System Controller
- Control options: Martin P3 System Controller™ via Martin P3
- PowerPort 1500™ and/or DMX
- Protocol detection: Automatic
- Control modes: pixel and module
- Control/User Interface:
- Device status: Multi-color visual indication
- Device test and reset: Pushbutton to call up local test patterns and reset device
- Optics:
- Minimum LED lifetime: 50 000 hours (to >70% luminous output)* *Figure obtained under manufacturer's test conditions
- Photometric Data:
- Luminous intensity, calibrated mode: 750 nit
- Viewing angle: 120° x 120°
- Preliminary data, figures are approximate
- VC-Grid 8x8 60™ Pixels per module: 64
- Video Processing:
- Brightness control
- Gamma correction and control
- Color temperature control
- Color gamut control
- Calibration processing
- Synchronization
- Construction:
- Base: Black FR4 circuit board
- Transparency through module (unmasked area): 8x8 models 49%
- Protection rating: IP20
- RoHS compliant
- Installation:
- Orientation: Any
- Maximum number of VC-Grid™ 8x8 60 modules per daisy-chain: 12
- Mounting: Mounting holes in module
- Connections:
- Power & data input: 4-pin Molex connector
- Power & data thru: 4-pin Molex connector
- Electrical:
- Nominal input voltage: 48 VDC from Martin P3 PowerPort 1500™ or external PSU
- Peak power consumption (at full intensity, full white): 30 W
- Typical power consumption (with typical video content): 10 W
- Figures for typical video content are indicative only and will vary
- Thermal:
- Cooling: Convection
- Maximum ambient temperature (Ta max.): 45° C
- Minimum ambient temperature (Ta min.): -20° C
- Peak heat dissipation (calculated, at full intensity, full white): 105 BTU/hr.
- Typical heat dissipation (calculated, with typical video content): 35 BTU/hr.
- Figures for typical video content are indicative only and will vary
- Approvals:
- EU safety: EN 60950
- EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
- US safety: ANSI/UL 60950-1
- Canadian safety: CSA C22.2 No. 60950-1
