ETC/Elec Theatre Controls S4LEDS2THD-0-A

Source Four LED Series 2 Tungsten HD Engine Only

OUR PART #: S4LEDS2THD-0-A Write the First Review.

Though it may look the same on the outside, the ETC Source Four LED Series 2 is the evolution of LED lighting...
Learn More
Our Price: $2,375.00
Price-Matching Symbol. Low Price Guaranteed Free Shipping Available FREE Shipping
Usually ships in 7-14 business days.
Need it sooner? Call us!

Related Products

Though it may look the same on the outside, the ETC Source Four LED Series 2 is the evolution of LED lighting, offering even more of what makes the Source Four LED the best LED profile available. This particular product [ETC model: S4LEDS2THD-0-A] is the Source 4 Series 2 LED Tungsten HD Engine Only (lens sold separately), and features a standard Edison connector. With finely-tuned electronics and optimized arrays, the Series 2 delivers a combination of light quality and output that can't be matched.

The Source Four LED Series 2 Tungsten HD arrays are designed for broadcast lighting, offering flicker-free operation, and high-definition lighting. With a new mix of LED emitters, the luminaires' output is significantly brighter than the original Source Four LED white-light arrays. The Tungsten HD array matches conventional tungsten lighting, with adjustable warm-white (2700 to 4500K) light. They offer tint control, so they can be tweaked to perfectly illuminate individual skin tones. The Series 2 LED light engines work with all Source Four lens tubes, giving a high-quality, controllable beam of light. For the best results, it is highly recommended that EDLT versions are used. We also offer a special LED-only version of the 50° lens tube.

ETC Source Four LED Series 2 Specifications:

General

  • 60-LED array
  • ETL listed to UL1573 – the standard for stage and studio lighting units
  • IP20-rated for indoor use
  • Power and DMX in/thru connections for easy setup
  • User-friendly control interface with multiple modes and fixture settings

Physical

  • Rugged die-cast all-metal housing
  • Available in black (standard), white or silver gray or custom colors (contact factory)
  • C-clamp
  • Positive-locking double-clutch fixture body
  • Slot for glass or stainless steel patterns and soft-focus diffuser
  • Wide accessory slot with sliding cover for motorized pattern devices or optional iris
  • Hanging yoke standard. Optional yoke/floor-stand available

Electrical

  • 100VAC to 240VAC 50/60Hz universal power input
  • Neutrik power in and thru connections
  • Up to (9) Lustr or seven Daylight HD/Tungsten HD luminaires (15A max) may be linked via power thru connector (10 Lustr or 8 Daylight HD/Tungsten HD fixtures total per circuit) when used with R20 Relay Module or Unison® Echo™ Relay Panel
    -- Consult breaker-trip curves when used with other equipment. Requires power from a non-dim source.
  • Inrush
    -- 120V: 50A (First half-cycle)
    -- 240V: 107A (First half-cycle)
  • LED*
    • 20,000-hour LED life (20,000 hours to 70% intensity)
    • 60 Luxeon® Rebel LED emitters
    *See additional LED notes on page 4 of Datasheet (under "Documentation" tab, above)

Color

  • Exclusive x7 Color System seven-color LED array (Lustr)
  • Selection from the x7 Color System to provide high quality, variable-white light
    -- Tungsten HD (2700K-4000K)
    -- Daylight HD (4000K-6500K)
  • Beautifully illuminates skin tones and other objects for natural appearance and high color rendering
  • Broad-spectrum color interacts seamlessly with conventional sources
  • Exclusive optional red-shift option emulates tungsten dimming performance

Optical

  • Use the included soft-focus diffuser for creating washes or soft light
  • Best performance using ETC's EDLT lens tubes
  • Can use all ETC Source Four interchangeable lens barrels: 5°, 10°, 14°, 19°, 26°, 36°, 50°, 70°, and 90° field angles, as well as 19°, 26°, 36°, and 50° EDLT lenses
  • For better performance, use the LED 50° barrel

Control

  • DMX512 in and thru via five-pin XLR connectors
  • Multiple control options, including RGB, strobe, and console-free Master/Slave mode
  • 15-bit virtual dimming engine provides smooth, high-quality theatrical fades and minimizes color shift during dimming
  • RDM functionality for address and setting changes
  • See DMX Control Table in Datasheet (under "Documentation" tab above) for additional information

Thermal

  • Ambient operating temperature of 32° to 104°F (0° to 40°C)
  • Active electronic thermal management for droop-free operation
  • Quiet fan cooling
  • Fixture is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around fixture housing
ETC/Elec Theatre Controls 42550LT 25°-50° Black Source 4 Zoom Lens Assembly

ETC/Elec Theatre Controls 42550LT 25°-50° Black Source 4 Zoom Lens Assembly

ETC’s 42550LT is a 25°-50° zoom lens tube assembly—in Black—designed to be used with ETC’s Source Four incandescent and LED ellipsoidal light engine bodies.ETC’s patented one hand zoom and focus operation makes adjusting the ...
$575.00
In Stock
Free Shipping AvailableFree Shipping
ETC/Elec Theatre Controls S4LEDCYC Source Four LED CYC Lens Adapter

ETC/Elec Theatre Controls S4LEDCYC Source Four LED CYC Lens Adapter

The Source Four LED™ just got even more versatile. By removing the luminaire’s lens barrel and attaching a Source Four LED CYC adapter, any Source Four LED can become a superior tool for lighting cycloramas. Other cyc lights only serve ...
$400.00
In Stock
Free Shipping AvailableFree Shipping
ETC/Elec Theatre Controls 400RS Drop In Iris for Source Four

ETC/Elec Theatre Controls 400RS Drop In Iris for Source Four

This accessory is a Drop In Iris for 5-90 degree Source Four light fixtures.
$145.00
In Stock
Free Shipping AvailableFree Shipping
ETC/Elec Theatre Controls 400TH Black Top Hat, 5" Tube

ETC/Elec Theatre Controls 400TH Black Top Hat, 5" Tube

This accessory is a black Top Hat with a 5" tube that intended to be used with 19-50 degree Source Four and Source Four jr fixtures.
$23.00
In Stock
ETC/Elec Theatre Controls 400CC C-Clamp for ETC Fixtures, Black

ETC/Elec Theatre Controls 400CC C-Clamp for ETC Fixtures, Black

This C-Clamp from ETC is useful for mounting and locking lighting fixtures to a grid pipe and includes an M12 thread screw for the fixture yoke.
$21.00
In Stock
ETC/Elec Theatre Controls 400PH-G B Size Pattern Holder - Glass

ETC/Elec Theatre Controls 400PH-G B Size Pattern Holder - Glass

This Source Four accessory is a Glass Pattern Holder (B Size) for 5-90 Degree Source Four Fixtures.  Specifications: X = 2.75” Y = 3.75”
$12.50
In Stock
ETC/Elec Theatre Controls 400SC 30" Source Four Safety Cable in Black

ETC/Elec Theatre Controls 400SC 30" Source Four Safety Cable in Black

This black safety is 30" in length and is a useful Source Four fixture accessory.Specifications: Cable is a 30" long, 1/8" diameter black wire rope cable with snap clamp fitted. The safety ratio of the cable is 5:1 The breaking load ...
$10.30
In Stock
ETC/Elec Theatre Controls 400PH-A Pattern Holder - Size A

ETC/Elec Theatre Controls 400PH-A Pattern Holder - Size A

This Source Four accessory is an A size for 5º-90º Source Four fixtures.Specifications:  X = 3.25” Y = 3.75”
$8.40
In Stock
ETC/Elec Theatre Controls 400PH-B Pattern Holder - Size B

ETC/Elec Theatre Controls 400PH-B Pattern Holder - Size B

This Source Four accessory is a B size Pattern Holder for 5º-90º Source Four fixtures.Specifications:  X = 2.75” Y = 3.75”
$8.40
In Stock
ETC/Elec Theatre Controls 407CF Gel Frame for Source Four PAR

ETC/Elec Theatre Controls 407CF Gel Frame for Source Four PAR

This Source Four PAR accessory is a Color Frame that comes with a black finish.
$8.25
In Stock
ETC/Elec Theatre Controls 400DN Donut

ETC/Elec Theatre Controls 400DN Donut

This Source Four fixture accessory is a 6.25-inch donut that controls flare in template projections.NOTE: Use A-size pattern holder with Source Four for maximum pattern effectiveness.
$7.10
In Stock
ETC/Elec Theatre Controls 400CF Color Frame for the Source Four

ETC/Elec Theatre Controls 400CF Color Frame for the Source Four

Product shown in image is for illustrative purposes only. Actual product may vary in appearance.Color Frame for the Source Four.
$6.40
In Stock
ETC/Elec Theatre Controls 41530LT 15/30 S4 Zoom Assembly

ETC/Elec Theatre Controls 41530LT 15/30 S4 Zoom Assembly

With Source Four® Zoom you only need one fixture for a variety of field angles. Plus, Source Four Zoom makes it easy: ETC's patented one-handed zoom operation makes adjustments quick, simple and safe. Technicians can focus with one hand ...
$575.00
Usually ships in 7-14 business days.
Free Shipping AvailableFree Shipping
ETC/Elec Theatre Controls S4LEDFRES  Source Four LED Fresnel Adapter

ETC/Elec Theatre Controls S4LEDFRES Source Four LED Fresnel Adapter

The ETC Source Four LED Fresnel adapter fits any Source Four LED light engine and creates tunable-white or brightly-colored washes with soft edges. The light blends evenly – with smooth overlap and uniform distribution – for washes ...
$500.00
Usually ships in 7-14 business days.
Free Shipping AvailableFree Shipping
ETC/Elec Theatre Controls S4LED-SWD14 Smooth Wash Diffuser for 5 Degree Lens Tube

ETC/Elec Theatre Controls S4LED-SWD14 Smooth Wash Diffuser for 5 Degree Lens Tube

This Source Four LED accessory is a Smooth Wash Diffuser that is used when extra-smooth blending of multiple Source Four LED fixtures is required. The smooth wash diffuser is placed into the gel frame slot of the lens tube. This type ...
$95.00
Usually ships in 7-14 business days.
Free Shipping AvailableFree Shipping
ETC/Elec Theatre Controls DPJ-10 10 ft. PowerCon Male to Female Fixture to Fixture Power Thru Jumper

ETC/Elec Theatre Controls DPJ-10 10 ft. PowerCon Male to Female Fixture to Fixture Power Thru Jumper

ETC's DPJ-10 is a 10 ft. PowerCon male to female fixture to fixture poewr-thru jumper cable.  This cable connects to the Desire D40 or D60's output (thru) connector to provide link to successive fixtures.
$85.00
Usually ships in 7-14 business days.
Free Shipping AvailableFree Shipping
ETC/Elec Theatre Controls DPJ-5  5 ft PowerCon Male to Female Fixture to Fixture Power Thru Jumper

ETC/Elec Theatre Controls DPJ-5 5 ft PowerCon Male to Female Fixture to Fixture Power Thru Jumper

ETC's DPJ-5 is a 5 ft. PowerCon male to female fixture to fixture poewr-thru jumper cable.  This cable connects to the Desire D40 or D60's output (thru) connector to provide link to successive fixtures.
$75.00
Usually ships in 7-14 business days.
Free Shipping AvailableFree Shipping
ETC/Elec Theatre Controls DPA-A 5ft ETC PowerCon to Edison Connector Cable

ETC/Elec Theatre Controls DPA-A 5ft ETC PowerCon to Edison Connector Cable

The DPA-A from ETC is a 5-foot Powercon to parallel blade U-ground (Edison) connector cable. This item is compatible with the following ETC products: ColorSource PAR ColorSource SPOTSource Four LED Source Four LED Studio HD ...
$75.00
Usually ships in 7-14 business days.
Free Shipping AvailableFree Shipping
ETC/Elec Theatre Controls S4LED-SWD12 Smooth Wash Diffuser for 10 Degree Lens Tube

ETC/Elec Theatre Controls S4LED-SWD12 Smooth Wash Diffuser for 10 Degree Lens Tube

This Source Four LED accessory is a Smooth Wash Diffuser that is used when extra-smooth blending of multiple Source Four LED fixtures is required. The smooth wash diffuser is placed into the gel frame slot of the lens tube. This ...
$60.00
Usually ships in 7-14 business days.
Free Shipping AvailableFree Shipping
ETC/Elec Theatre Controls S4LED-SWD7 Smooth Wash Diffuser for 7.5 Gel Frame

ETC/Elec Theatre Controls S4LED-SWD7 Smooth Wash Diffuser for 7.5 Gel Frame

This Source Four LED accessory is a Smooth Wash Diffuser that is used when extra-smooth blending of multiple Source Four LED fixtures is required. The Smooth Wash Diffuser is placed into the gel frame slot of the lens tube. This type ...
$28.00
Usually ships in 7-14 business days.
Free Shipping AvailableFree Shipping
ETC/Elec Theatre Controls S4LED-SWD6 Smooth Wash Diffuser for 6.25 Gel Frame

ETC/Elec Theatre Controls S4LED-SWD6 Smooth Wash Diffuser for 6.25 Gel Frame

This Source Four LED accessory is a Smooth Wash Diffuser that is used when extra-smooth blending of multiple Source Four LED fixtures is required. The Smooth Wash Diffuser is placed into the gel frame slot of the lens tube. This type ...
$27.00
Usually ships in 7-14 business days.
Free Shipping AvailableFree Shipping
ETC/Elec Theatre Controls 400HH Black Half Hat

ETC/Elec Theatre Controls 400HH Black Half Hat

This Source Four accessory is a black Half Hat that measures 7x7x6 inches. Like the Top Hat this unit helps to control and reduce flare but from one side only.
$23.00
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls S4LED-SFD Source Four LED Soft Focus Diffuser

ETC/Elec Theatre Controls S4LED-SFD Source Four LED Soft Focus Diffuser

The Soft Focus Diffuser is a diffuser that is an accessory for Source Four LED fixtures that fits into a standard A-Size pattern holder and delivers beautiful homogenized light when not in sharp focus. You can also use this diffuser with ...
$15.00
Usually ships in 7-14 business days.

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information