Cables To Go 60118 35 ft RapidRun Optical Runner Cable

The Cables To Go 60118 is a 35-foot RapidRun® optical runner cable, Plenum and OFNP-rated for in-wall installation and optimized for extremely high bandwidth connectons over fiber optic cable.

RapidRun Optical is C2G's leanest-longest, fastest-strongest RapidRun product yet. Designed to be the standard for in-wall HDMI audio/video installations, it boasts an 18Gbps bandwidth, a diameter of just a half inch and a plenum rated jacket. Using pre-terminated break-away flying leads and wall plates with an in-wall runner provides a flexible, efficient, high quality connection for all types of equipment, with no field terminations. Utilize this Plenum, OFNP-Rated fiber runner cable for in-wall installations that require the cable to be run through an air handling space or air plenum. This RapidRun solution supports up to a 4k resolution, while providing enough bandwidth to serve the audio/video needs of commercial applications from classrooms to lecture halls and auditoriums to boardrooms for years to come.

Cables To Go 60118 Features:

• Supports full 1080p, 4k, and 3D HDMI features
• Utilizes fiber cabling, so it is resistant to EMI/RFI interference
• Powered with USB at the display side (RX)

Cables To Go 60118 Specifications:

• General Specifications
  • Color: Black
  • Length: 35 ft
  • Jacket Rating: Standard
  • UPC: 757120601180
  • Warranty: 3 Years
  • Weight: 0.241 lb
• Electrical Specifications
  • Resolutions Supported: 4k x 2k 60Hz, 4k x 2k 30Hz, 1080p, 720p, 480p
  • HDMI Features Supported: Ethernet Return Channel, HDMI High Speed, HDCP, EDID, CEC
  • Audio Return Channel
  • Data Rate Supported: 18Gbps
• Physical Characteristics
  • Jacket Rating: OFNP (Plenum)
  • Temperature Rating: 0°C ~ 70°C
  • Humidity: 0% ~ 90% RH
  • Cable Pull Strength: 30 lbs
  • Bend Radius: 5mm
  • Compliance: OFNP, CE, FCC, RoHS2

Note

NOTE: Some HDMI source devices are unable to output the power required to send A/V signals over the Optical runner cable which results in no image being displayed. In those instances, an HDMI Voltage Inserter (sold separately) may be required. Each complete RapidRun Optical solution requires a break-away flying lead or wall plate to terminate each end of the runner cable. Each runner requires (2) break-away flying leads OR (1) wall plate and (1) break-away flying lead. RapidRun Optical Runners require the flying leads and/or wall plates in order to function properly. The Runner cables cannot be used to connect directly to source/display devices. RapidRun Optical Runners are directional cables that require the TX to be installed at the source side and the RX to be installed at the display side.