RDL D-RT2 Remote Control Selector, Power On/Off

Radio Design Labs' D-RT2 is a wall panel remote control selector designed for turning an audio or video source on or off.

The front panel of the D-RT2 features two pushbuttons with two associated LEDs. Upon initial power-up, the OFF mode is selected. Touching the other button de-selects OFF and immediately selects ON. An LED adjacent to each button shows which mode is selected.

In a typical installation, the D-RT2 may be used to turn an audio or video source on or off. To turn on an audio source, the D-RT2 may be connected to an RDL ST-SSR1 or ST-RX2 Solid-State Audio Switch. For video switching, an RDL TX-MVX may be used. In each of the above examples, only one output terminal is needed for triggering, therefore a single shielded pair (3-conductor cable) is required for remote connection. For more complex switching networks, both outputs (ON and OFF) may be used. In an audio or video control installation, the D-RT2 may be mounted adjacent to an RDL remote volume control, such as the RLC2, RLC3 or RLC10K.

In installations where ULTRASTYLE™ wall controls are preferred, use the RUC-4 Universal Remote.

Radio Design Labs D-RT2 Features:

• Remote Selection of ON or OFF
• Single-Button Selection for Each Function
• Open-collector Switching
• 3-wire or 4-wire Remote Wiring
• Professional Aesthetic Appearance
• Companion to other RDL® Remote Controls
• LED Indication

Radio Design Labs D-RT2 Specifications:

• Selectors (2): Momentary pushbuttons, (1 for ON, 1for OFF)
• Indicators (2): Green/Red LEDs, (indicates status ON or OFF respectively)
• Connections: Detachable terminal block; Power input; Separate open-collector outputs for ON and OFF (25 mA max.)
• Ambient Operating Environment: 0° C to 55° C
• Power Requirement: GROUND-REFERENCED, 24 Vdc @ 30 mA
• Mounting: Mounts in standard US electrical box, RDLWB- or SMB- series boxes; cover plate available separately
• Package Type: Cardboard Box
• Package Dimensions: 3.625" x 4.625" x 2.125"
• Shipping Weight: 0.45 lbs.
• WEEE weight: 0.285 lbs.

NOTE:

Radio Design Labs' PS-24AS power supply is NOT included but is required in order to power this product. Please click here for more information on the PS-24AS power supply.