Atlas IED DPA2402 Digital Power Amplifier with Dante Option, 2x1200W at 70V

Atlas IED DPA2402 Multi-Channel Power Amplifier with Optional Dante™ Network Audio

DPA Series amplifiers provide four output channel amplifiers with three models delivering up to 600-watts per channels. Each model can be used in 2-channel 70.7V, 4-channel 4-Ohm, or 3-channel 70.7V and 4-Ohm configurations making them incredibly flexible for a variety of installation types. Internal digital signal processing allows each model to be customized to maximize its performance. The DSP software is embedded in the amplifier and is accessible via a web user interface. DSP adjustments include I/O routing, high and low pass filters, EQ, output level adjustment, delay, and limiter. Additionally, input mute for both audio sense and contact closure, level control link assignments, and port assignment and output impedance can be configured in the software. Site manager software is available that allows network administrators to see all DPA amplifiers on the network for easy identification, set-up, and troubleshooting if necessary.

Features

• Configurable for Use as 2-Channel 70.7V Amplifier
• Configurable for Use as 4-Channel 4Ω Amplifier
• Configurable for Use as Single Channel 70.7V and 2-Channel 4Ω Amplifier
• Networkable with On Board GUI
• Configurable DSP Via GUI
• Site Manager Software with Network Auto-Discovery Fault Reporting, Input & Output Status, Standby Status and Remote Activation via a Scheduler Timer
• User Page with Assignable Input & Output Level Control
• Mute Assignments Triggered Via Audio Signal or Contact Closure
• Audio Sense Turn-On/Off
• Four Balanced Inputs
• Optional Accessory Card Slot for 4-Channel Dante™ Receiver Card or (2) Mic / Line, (2) Aux Input Card
• PC, iOS, & Android Compatible

Specifications

• Power Output
  • 2 x 1200-Watts @ 70.7V
  • 2 x 1200-Watts @ 100V
  • 4 x 500-Watts @ 4Ω
  • 4 x 300-Watts @ 8Ω
  • 1 x 1200-Watts @ 70.7V, 2 x 600-Watts @ 4Ω
  • 1 x 1200-Watts @ 100V, 2 x 600-Watts @ 4Ω
• Amplifier Topology: Class AB Switching Hybrid -BASH
• Input Sensitivity: 750mV Balanced, 0dBU
• Input Impedance: Balanced 40kΩ
• Maximum Input Signal: +14dBU Inputs 1-4, +7dBU Inputs 5-8 with Dante™
• THD: 1% @ Rated Output
• Frequency Response: -3dB 20Hz - 20kHz (DSP Filters Set to Flat)
• Crosstalk: 73dB @ 1kHz
• Voltage: 110V - 120V & 220V - 240V Auto Switch Over, 50/60Hz
• Idle Current: 26W
• Rack Units: 2
• Dimensions (H x W x D): 3.47 x 19 x 14.5 in (8.9 x 48.3 x 36.8 cm)
• Signal To Noise Ratio: -100dB Below Rated output (A-Weighted)
• Weight: 20.8 lbs. (9.53kg)
• Voltage Compatibility: Universal