Bose IZA-2120-HZ

2x120W Freespace Mixer Amplifier

OUR PART #: IZA-2120-HZ Write the First Review.

  • 4-input/2-output mixer amplifier with internal digital signal processing
  • True two-zone technology supports the following for each output:
  • EQ for FreeSpace FS3/HPF (55 Hz), DS 16, DS 40, DS 100, FS3B
  • Bose volume controls
Learn More

Call for price!

Related Products

The BoseĀ® FreeSpaceĀ® IZA amplifiers are optimized for commercial applications, and possess three key features ā€“ Loudspeaker EQ for enriching audio quality, Opti-voiceĀ® paging for equalizing vocal/speech frequency ranges while providing seamless transitions and Dynamic EQ that ensures full and balanced music at any volume. When paired with FreeSpaceĀ® loudspeakers, the BoseĀ® IZA 2120-HZ integrated zone amplifier elevates the audio experience of background/foreground music and paging to a higher level.

The ampā€™s two-zone capability provides two independent outputs that support volume and source selection remotes, EQ, tone controls, and paging/auxiliary routing options. An independent Loudspeaker EQ output enhances audio quality and simplifies connection to BoseĀ® loudspeakers ā€“ FreeSpaceĀ® 3 systems, FS3 subwoofer, DS 16, DS 40 and DS 100 - and has expansion-ready connectivity with FreeSpaceĀ® ZA amplifiers to drive additional zones.

Meant for 70/100V high-impedance applications, the unitā€™s reliable 2x120W Class-D amplification is suitable for retail stores, hospitality venues, conference centers and schools. The ampā€™s dual remotes support optional volume/source selection for independent (or combined) zone control, and this eliminates the need for bulky, inefficient, and sound-altering 70/100V in-line volume controls.

Remote muting allows for the amp to be muted with a centralized control system, and an intuitive feature setup enables the amplifier to be configured without a PC for remote paging or auxiliary input/output. In addition, an Auto-Standby feature allows the amplifier to consume less power when not in use, and a simplified front panel interface provides tone, source selection and master volume controls, as well as a connection to mobile sources via a 3.5 mm connector.

Bose IZA 2120-HZ Includes:

  • Amplifier unit
  • (2) rack ears
  • AC power cord [5 country-specific versions to choose from]
  • (4) plastic feet with locking pins
  • Installation and Operating Guide
  • (2) 5-pin Euroblock
  • (3) 4-pin Euroblock
  • (3) 2-pin Euroblock
  • (2) jumper wires

Bose IZA 2120-HZ Features:

  • 4-input/2-output mixer amplifier with internal digital signal processing
  • True two-zone technology supports the following for each output:
    • EQ for FreeSpace FS3/HPF (55 Hz), DS 16, DS 40, DS 100, FS3B
    • Bose volume controls
    • Bass/treble tone controls
    • Paging/auxiliary routing option
    • REMOTE1 can control both zones, or each zone can be independent
    • Paging and Aux input can be set to occur in one or both zones
  • A/B select can be front panel or remote-controlled
  • Detection and prioritization algorithms
  • Automatic Gain Control (AGC)
  • Auto standby can be enabled or disabled
  • Muting via a normally open contact closure
  • DIP switches to quickly configure feature set
  • Universal power supply handles 100V AC - 240V AC (Ā±10%, 50/60 Hz)
  • Protection from heat overload, output shorting, and low/high AC line voltage

Bose IZA 2120-HZ Specifications:

  • Frequency Response: 55 Hz - 20 kHz (+0/ā€“3 dB, @ 1W reference 1 kHz)
  • Amplifier Power: 2 x 120W @ 70/100V
  • Continuous Power Per Channel: 2 x 60 W @ 70/100V
  • THD+N: < /= 0.3 % (at rated power)
  • Dynamic Range: 88 dB
  • Built-in Loudspeaker EQ: Bose FreeSpaceĀ® 3 systems, FS3 subwoofer, DS 16, DS 40 and DS 100
  • Input Channels:
    • Line Inputs: 2 unbalanced, 2 balanced
    • Page Input: 1 balanced mic/line
    • Auxiliary Input: 1 unbalanced line
  • Input Connectors:
    • A & B line: (2) Balanced 5-pin Euroblock and (2) unbalanced RCA pair
    • Page/Mic Line: (1) Balanced 4-pin Euroblock
    • Auxiliary Line: (1) Balanced 1/8" (3.5 mm) TRS
  • Output Channels and Connectors:
    • 2 ch/zones, (2) 2-pin inverted touchproof Euroblock connectors
  • Dimensions: 1.7" H x 19.0" W x 12.8" D (44 mm H x 483mm W x 324 mm D)
  • Net Weight: 9 lbs. (4.1 kg)
  • Cooling System: Single fan, continuous left-to-right air flow

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information