RDL TX-TPS6A

Passive Single-Pair Sender

OUR PART #:  TX-TPS6A Write the First Review.

Our Price: $100.56
List Price: $118.68
You save 15%!
  • Single +4 dBu Low-Impedance Balanced Audio Input
  • Input on Detachable Terminal Block
  • Switch Selects which RJ45 Pair (A, B or C) is Fed
  • Signal and Power Pair Pass-Through from LOOP IN Jack
Learn More
Price-Matching Symbol. Low Price Guaranteed Free Shipping Available FREE Shipping
In Stock
Pro Buyer Card
Deferred Interest if paid in full within 6 months * Learn More

Related Products

Radio Design Labs' TX-TPS6A is a single-pair audio sending module compatible with RDL Format-A twisted pair products. One low-impedance +4 dBu balanced line-level audio source connects to the module using the detachable terminal block. A studio-quality transformer provides isolation between the audio source and the RJ45 OUTPUT.

The single-pair sender feeds the input signal to the cable pair set on the front-panel switch during installation. This module drives only one cable pair, therefore a LOOP IN RJ45 jack is provided to accept signals and power from other mic-level or line-level Format-A senders. Two other single-pair senders may be chained to the LOOP IN jack, or a single two-pair sender may be connected. If three single-pair senders are connected together, each sender must feed a different pair: A, B or C. The TX-TPS6A must be set to feed pair A if it is connected together with an RDL two-pair sender that feeds stereo audio on pairs B and C.

The TX-TPS6A is a passive module that does not require power to operate. If power is present on a cable connected to the LOOP IN jack, that power is passed through to the modules connected to the OUTPUT jack.

Radio Design Labs TX-TPS6A Features:

  • Single +4 dBu Low-Impedance Balanced Audio Input
  • Input on Detachable Terminal Block
  • Switch Selects which RJ45 Pair (A, B or C) is Fed
  • Signal and Power Pair Pass-Through from LOOP IN Jack
  • Passive Circuitry Does Not Require Power
  • Galvanic Isolation through a Studio-Quality Transformer
  • Daisy-Chain with Single-Pair or Two-Pair Format-A Senders

Radio Design Labs TX-TPS6A Specifications:

  • Input: Low-impedance Balanced
    • Recommended source impedance < 150 Ohm
  • Input Connection: Detachable Terminal Block (Balanced)
  • Input Level: +4 dBu balanced; +22 dBu Max
  • Format-A Signal Pair Used: Switch-selectable A, B, or C
  • Format-A Input: RJ45 LOOP IN
  • Output: RDL TP Format-A
  • Output Connection: RJ45
  • Frequency Response: 20 Hz to 20 kHz (± 0.1 dB)
  • THD+N:
    • < 0.035% (50 Hz to 20 kHz, +4 dBu)
    • < 0.1% (20 Hz to 20 kHz, +4 dBu)
  • Headroom above +4 dBu: > 18 dB
  • CMRR: > 85 dB (50 Hz to 150 Hz)
  • Ambient Operating Environment: 0° C to 50° C
  • Power Requirement: Passive
  • Dimensions:
    • 3.0" (7.6 cm) W
    • 1.6" (4.08 cm) H
    • 2.09" (5.3 cm) D
  • Package Type: Cardboard Box
  • Package Dimensions: 2 x 2 x 4 in.
  • Shipping Weight: 0.695 lbs.
  • WEEE weight: 0.645 lbs.
  • Tariff code: 8517.18.0000
RDL TXRA5 TX-RA5

RDL TXRA5 TX-RA5

Radio Design Labs' TX-RA5 chassis is a single rack unit accessory which provides mounting for up to 5 TX Series products.
$34.19 List Price: $45.72You Save 25%
In Stock
RDL MB1-RDL Mounting Kit for STICK-ON, TX, or Rack-Up module

RDL MB1-RDL Mounting Kit for STICK-ON, TX, or Rack-Up module

Two mounting brackets mounts a STICK-ON, TX, or Rack-Up module to a flat surface.
$3.58 List Price: $4.22You Save 15%
In Stock
RDL SR4 SR-4

RDL SR4 SR-4

Radio Design Labs' SR-4 is a universal module chassis that can mount to a backboard, wall or nearly any other support. It provides mounting for 4 STICK-ON power amplifiers or 7 standard STICK-ON modules. TX ™ modules may also be mounted. ...
$87.76 List Price: $117.39You Save 25%
Usually ships in 6-10 business days.
RDL PM-1T Pole Mount Tray for RDL Module

RDL PM-1T Pole Mount Tray for RDL Module

The PM-1T is a tray that mounts above a projector using a standard (1.5" I.D.) round projector pole or any smaller round or rectangular pole. The tray accommodates up to two FP-PA20 Audio Power Amplifiers (for stereo operation) and two ...
$84.76 List Price: $113.36You Save 25%
Usually ships in 6-10 business days.
RDL TX-HRA3 RackMount 10.4" Rack Mount for 3 TX Series Products

RDL TX-HRA3 RackMount 10.4" Rack Mount for 3 TX Series Products

The TX-HRA3 rack mounts 3 TX modules. This adapter fits 10.4" racks.Radio Design Labs TX-HRA3 Rack Mount Specifications: Package Dimensions (LxWxD): 13" X 2.5" X 2.5" Shipping Weight: 0.55 lbs.
$32.51 List Price: $43.47You Save 25%
Usually ships in 6-10 business days.
RDL TX-RRB1  Rear Rack Rail Mounting Kit for Any TX Series Module

RDL TX-RRB1 Rear Rack Rail Mounting Kit for Any TX Series Module

Radio Design Labs' TX-RRB1 mounting kit contains a bracket to attach a TX module to a rear rack rail or to any flat surface.Shipping Weight: 0.15 lbsPackage Dimensions: 4" x 2" x 2"
$12.27 List Price: $14.48You Save 15%
Usually ships in 6-10 business days.
RDL DRA-35T Din Rail Adaptor for TX Module

RDL DRA-35T Din Rail Adaptor for TX Module

The DRA-35T provides mounting for any RDL® TX or MAX TX module to a DIN rail. The unique design allows mounting TX modules in a rack, cabinet or anywhere else DIN rail mounting of TX modules is desired.
$9.86 List Price: $11.62You Save 15%
Usually ships in 6-10 business days.
RDL MB3-RDL Kit to Mount ST, TX Series Modules on FP Panel

RDL MB3-RDL Kit to Mount ST, TX Series Modules on FP Panel

TX or STICK-ON Module fastens to MB-3 which slides into FP-RRA/H track.
$5.29 List Price: $7.07You Save 25%
Usually ships in 6-10 business days.
RDL MB2-RDL Mounting Kit for RU and TX Series

RDL MB2-RDL Mounting Kit for RU and TX Series

MB-2 pair mounts a RACK-UP or TX module above or below a surface.
$2.43 List Price: $2.87You Save 15%
Usually ships in 6-10 business days.

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information