ETC Source Four Mini LED 50 Degree 12W LED Mini Ellipsoidal with 50 Degree Lens, Canopy Mount, White

ETC's 4M50L-I-1 is a Source Four Mini LED light fixture that comes in white and with an install canopy mount. It features a 50° beam angle.

ETC Source Four Mini LED Fixtures

Going where no full-sized Source Four® has gone before, the Source Four Mini LED features the same crisp optics, sleek look, and the same user-friendly functionality as the legendary Source Four fixture, but in a much more compact format at a fraction of the size. This particular Source Four Mini LED has (4) field-angle choices and comes in the canopy-mount design. Surprisingly bright for its size, the Mini LED offers crystal-clear image projection and a bright, even field.

Applications/Venues:

• Museums
• Retail stores
• Restaurants
• Lobbies
• Light labs
• Theaters

ETC 4M50L-I-1 Source Four Mini LED Features:

• Rugged, die-cast fixture body with White Powder Coat Finish
• Interchangeable lens tubes permit selection of 19°, 26°, 36°, and 50° field angles
  • (Note: This model features the 50° version. Other options sold separately. Contact your Sales Pro for more information)
• Uniquely efficient optical system
• Long-life dimmable white LED source in two CRI values
  • -- Source Four Mini LED: 80+ CRI
  • -- Source Four Mini LED Gallery: 90+ CRI
• Tool-free lamp replacement
• Three-plane shutters
• Multiple accessories available for color, pattern, and filtering
• Insulated rear handle
• Custom paint colors available; contact your Sales Pro for more information
• Canopy-mount features:
  • Color-matched canopy
  • Canopy-mounting hardware for ceiling junction box included
  • 12V transformer or LED driver in canopy for hardwired 230V input

ETC 4M50L-I-1 Source Four Mini LED Specifications:

• Physical:
  • Die-cast aluminum construction (A380 grade)
  • Fine-texture, high-temperature powder-coated paint
  • White Finish
  • Steel yoke with 0.406” diameter mounting hole
  • Rotating barrel: ±175°
  • E-size gobo pattern holder (included)
    • -- 37.5mm with a 25.4mm image area
    • -- Holds patterns up to .05" thick (1.27mm)
  • Stainless steel, full hard shutters in a tri-plane assembly, 0.40mm (A301 grade)
  • Fixed-beam angles to suit a range of throw distances
  • Tool-free tilt and beam adjustment
  • High-impact resistant, thermally insulated knobs and shutter handles
  • Captive accessory slot for pattern holder (included)
  • Dual captive accessory slots for media frame (included)
  • Install canopy -
    • -- Color-matched, powder-coated canopy mount with LED driver (included)
    • -- Canopy dimensions: 5.31" W x 1.04" H
    • -- Installation hardware included
    • -- Fixture to canopy factory pre-wired for easy install
    • -- Built-in rotation stop to prevent cable damage
  • Black or white power lead
  • IP20 Rated
• Electrical:
  • Power at full intensity: 12W typical, 14W max
  • 18 AWG input wire size
  • Input voltage options:
    • -- 90-135V, 50/60Hz
    • -- 190-250V, 50/60Hz
  • Dimmable (forward and reverse phase)
  • Inrush (first half-cycle)
  • -- 120V: < 1A
  • -- 240V: < 1A
• Lamp:
  • Cree LED (Available in 80+ and 90+ CRI)
  • Long-life lamp: 35,000 hours, L70 lumen maintenance
  • 3000K color temperature
• Optical:
  • Fixed-beam options of 19°, 26°, 36°, and 50° field angles
    • (Note: This model features the 50° version. Other options sold separately. Contact your Sales Pro for more information)
  • Projector-quality, high-contrast lenses
  • Beam edge continually adjustable hard to soft
• Thermal:
  • 0° C to +40° C
• Approvals:
  • ETL listed to the following standards: UL/cUL1598