Product Overview
Designed to provide MADI I/O functionality for Post Production, Broadcast, Live Sound, or in the Recording Studio, the RedNet D64R expands your audio-over-IP network's MADI and Dante cpabilities.
MADI is widely used for large-scale digital audio systems such as audio consoles and conversion systems, allowing multiple channels to be carried along a single interface. The D64R provides the link between a Dante Ethernet-based audio system and any MADI / AES10 setup. The RedNet D64R supports up to 64 channels of both coaxial and optical MADI interfaces and is completely bi-directional, allowing the use of any Dante components including RedNet’s high quality interface products with a MADI system, or MADI components with a Dante system.
Turn possibility into reality with the RedNet D64R.
Features
- Connects a MADI system and a Dante network seamlessly together.
- Built-in redundancy with dual locking power and etherCON network connectors.
- Supports both coax and optical interfaces – connect simply to any MADI equipment
- Slave either the Dante system or MADI streams to an external clock
- Supports up to 64 channels of digital audio I/O at standard sample rates (44.1/48kHz) from a MADI system, 32 channels at 96kHz and 16 at 192kHz.
- Sample rate conversion (SRC) on each input and output, allowing MADI and Dante systems to operate simultaneously at different sample rates.
- Simple 1U rack-mount module with the classic red aluminium faceplate.
- RedNet Control and Dante software allow remote routing and control from the audio computer system via a software control panel – no hardware patching required.
Specifications
- Connectors (Rear panel):
- 2x etherCON locking Ethernet connectors – also compatible with standard RJ45 connectors
- 2x BNC Word Clock In and Out
- 2x BNC MADI Coaxial In and Out
- Duplex-SC MADI Optical connector In and Out
- 2x IEC power connector: 100–240Vac, 50/60 Hz, cord retaining clips included
- Controls (front panel): Power on/off
- Indicators (front panel):
- Green LED power indicator
- Network Status: Primary/Secondary/Locked
- PSU: A/B
- Sample Rate: 44.1/48kHz, x2, x4, Pull
- Clock Source: Internal, MADI, Word Clock
- MADI Input: Coax, Optical, Auto
- Clock Source: SRC, RedNet, MADI Input, Word Clock
- Signal: In, Out, Varispeed
- MADI Coaxial:
- Electrical Standard: As per AES10:2008
- Connector: BNC 75 Ohm
- Recommended Cable: 75 Ohm characteristic impedance
- MADI Optical:
- Optical Standard: As per AES10:2008 (ISO/IEC 9314-3, FDDI, ANSI X3.166)
- Recommended Cable: Multi-mode, Graded-index, 62.5µm core, 125µm cladding
- Connector: Duplex-SC (Single Mode available on request)
- Supported Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz
- Channel Count:
- Single Rate: 64 (56)
- Double Rate: 32 (28)
- Quad Rate: 16 (14)
- SRC:
- Lock Range: 41 kHz to 216 kHz (MADI)
- Sample Rate Ratio Limit: 6:1
- THD: –130dB (typical)
- Latency: 43 to 192 samples (sample rate dependent)
- Computer Connectivity:IP Network
- Form Factor:Rackmount
- Simultaneous I/O:64 x 64
- Digital Inputs:1 x BNC (MADI Coaxial), 1 x Optical (MADI)
- Digital Outputs:1 x BNC (MADI Coaxial), 1 x Optical (MADI)
- Clock I/O:1 x Word Clock (In), 1 x Word Clock (Out)
- Data I/O:2 x etherCON Ethernet
- Rack Spaces:1U
- Height:1.75"
- Width:19"
