Audio-Technica AT2035/ATHM20X AT2035/ATH-M20x Audio Package with Large Diaphragm Condenser Microphone & Closed-Back Monitor Headphones

OUR PART #: AT2035/ATHM20X

Copied to clipboard

A mic designed for the most critical studio/live applications combines with a great sounding and comfortable headphone from an iconic brand. ...Read more

Audio-Technica AT2035/ATHM20X AT2035/ATH-M20x Audio Package With Large Diaphragm Condenser Microphone & Closed-Back Monitor Headphones Image 1
Audio-Technica AT2035/ATHM20X AT2035/ATH-M20x Audio Package With Large Diaphragm Condenser Microphone & Closed-Back Monitor Headphones
No longer available at Full Compass
We've left this page up for reference only.

Questions? Contact our
Sales and Service Pros for expert
advice and package pricing.

800-356-5844

Email customer service

Accessories

Product Overview

A mic designed for the most critical studio/live applications combines with a great sounding and comfortable headphone from an iconic brand.

Features

  • Large diaphragm for smooth, natural sound and low noise
  • High SPL handling and wide dynamic range provide unmatched versatility
  • Custom shock mount provides superior isolation
  • Switchable 80 Hz high-pass filter and 10 dB pad
  • Includes custom shock mount & protective pouch

AT2035 Microphone Specifications

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 20 Hz - 20 kHz
  • Low Frequency Roll-off:80Hz, 12dB/octave
  • Open Circuit Sensitivity:-33dB (22.4 mV) re 1V at 1 Pa
  • Impedance: 120 ohms
  • Maximum Input Sound Level: 148dB SPL, 1kHz at 1% THD; 158dB SPL, with 10dB pad (nominal)
  • Noise: 12dB SPL
  • Dynamic Range (typical):136dB, 1kHz at Max SPL
  • Signal-to-Noise Ratio: 82dB, 1kHz at 1Pa
  • Phantom Power Requirements:11-52V DC, 3.8 mA typical
  • Switches: Flat, roll-off; 10dB pad (nominal)
  • Weight: 14.2 oz
  • Dimensions: 6.69" long x 2.05" maximum body diameter
  • Output Connector: Integral 3-pin XLRM-type

ATH-M20X Headphone Specifications

  • Type: Closed-back dynamic
  • Driver Diameter: 40 mm
  • Magnet: Neodymium
  • Voice Coil: Copper-clad aluminum wire
  • Frequency Response: 15 Hz- 20 kHz
  • Maximum Input Power: 700 mW at 1 kHz
  • Sensitivity: 96 dB
  • Impedance: 47 ohms
  • Weight: 190 g (6.7 oz), without cable and connector
  • Cable: 3.0m (9.8'), straight, left-side exit
  • Accessory Included: 6.3 mm (1/4") snap-on adapter

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.