Product Overview
The MuxLab 500715 is their 3G-SDI to HDMI Extender Kit, which converts HD-SDI to HDMI and then transmits it up to 330 ft (100m) via Cat5e/6 cable at all resolutions in a point-to-point configuration. The HD-SDI to HDMI Extender Kit supports transmission of up to 2.97/3.0 Gbps uncompressed, un-encrypted digital video (optionally including embedded Audio and/or Time Code) within television facilities and between professional video equipment.
MuxLab MUX-500715 Features:
- Up to 330 ft (100m) via Cat5e cable
- Up to 400 ft (122m) via Cat6 cable
- Supports:
- SDI-SMPTE 259M-C (270Mbps)
- HD-SDI-SMPTE 292M (1.485, 1.485/1.001 Gbps)
- HD-SDI-SMPTE 424M/425M (2.97/3.0 Gbps)
- LED diagnostics: sync, SDI detect
MuxLab MUX-500715 Specifications:
- Environment: SDI single link: SD, HD & 3G.
- Devices: Monitors supporting the original SDI rateonly.
- Standard supported: SMPTE 259M (270Mb/s), SMPTE 292M& SMPTE 424M.
- Bit rates: 270Mb/s, 1.485Gb/s & 2.97 Gb/s(automatic selection).
- Video format supported (monitor must support theoriginal SDI rate):
- SD: 525i, 59.94/60Hz & 625i, 50Hz
- HD:
- 720p @ 60Hz, 50Hz, 30Hz, 25Hz & 24Hz
- 1080i @ 60Hz & 50Hz
- 1080p @ 30Hz, 25Hz & 24Hz
- 3G: 1080p @ 60Hz & 50Hz
- Sound format supported: 48kHz @ 24 bit, 20 bit &16 bit.
- Indicators:
- Power:
- SDI Sync (on rx side only)
- RJ45 Sync
- Video (on tx side only)
- Sound (on tx side only)
- HDMI Sync (on rx side only)
- Connectors (On each unit):
- One BNC 75 ohm female on source side.
- One HDMI on receiver on receiver side
- One RJ45S for Cat5e/6 unshielded twisted pair.
- One power connector, 2mm.
- Maximum Distance:
- UTP Cat 5e: 330 ft (100 m) UTP Cat 6: 400 ft (122 m) for 500715
- UTP Cat 5e: 500 ft (150 m) UTP Cat 6: 500 ft (150 m) for 500716
- Maximum distance applies for all format and speed between boxes.
- On SDI side: 450 ft (140m).
- On HDMI side: 15 ft (5 m) typical.
- RJ45 Pin Configuration (Use EIA/TIA 568A or 586Bstraight-through wiring only.): RJ45 Link:
- Pin 1 (R)
- Pin 2 (T)
- Pin 3 (R)
- Pin 4 (R)
- Pin 5 (T)
- Pin 6 (T)
- Pin 7 (R)
- Pin 8 (T)
- Cables (NOT INCLUDED):
- One straight Cat 5e/6 twisted pair cables required.
- One 75 ohm coaxial cables with 75 ohm BNC required.
- One HDMI cable.
- Power Supply (Included): Two 100-240V/5VDC 6W powersupplies with interchangeable blades for NA, Europe and UK.
- Power Consumption:
- Transmitter: 4 Watts
- Receiver: 6 Watts
- Temperature:
- Operating: 0° to 40°C
- Storage: -20° to 85°C
- Humidity: Up to 95% non-condensing
- Enclosure: 6061 Aluminum alloy
- Dimensions: 4.50" x 3.00" x 1.25" (11.4 x 7.6 x 3.2cm)
- Weight: 2.5 lbs (1.1 kg)
- Warranty: 2 years