Product Overview
The Martin Professional RUSH MH 1 Profile Plus super bright LED profile moving head is even brighter than its predecessor RUSH MH 1 Profile, with 50% more output. It features efficient optics with an increased beam angle from 13 degrees to 16 degrees punches out a variety of effects and colors from two gobo wheels and two color wheels. For added versatility and effect, it also houses an electronic dimmer and strobe, iris and 3-facet prism, and an improved cooling system for quieter operation.
Included Items:
- Power cable: 1.5 m (4.9 ft.), without mains plug
- Two quarter-turn brackets
Martin Professional RUSH MH 1 Profile Plus Features:
- LED profile moving head
- Super bright - efficient optics
- Rotating gobo wheel
- Fixed gobo wheel
- 2 x color wheels
- Electronic dimming and strobe
- Iris and 3-facet prism
- 3 & 5 pin XLR
Martin Professional RUSH MH 1 Profile Plus Specifications:
- Physical
- Length: 418 mm (16.5 in.) Width: 314 mm (12.4 in.) Height: 552 mm (21.7 in.)
- Weight: 18 kg (39.7 lbs.)
- Dynamic Effects
- Color wheel 1: 7 colors plus open, rotation with variable direction and speed
- Color wheel 2: 7 colors (incl. 1 x UV, 2 x CTC) plus open, rotation with variable direction and speed
- Rotating gobo wheel: 7 gobos plus open, wheel rotation, gobo indexing, rotation and shake Static gobo wheel: 8 gobos plus open, wheel rotation and shake
- Electronic 'shutter' effect: Strobe effect, pulse effects, instant open and blackout
- Prism: Indexing and rotation with variable direction and speed
- Iris: Motorized
- Focus: Motorized
- Electronic dimming: 0 - 100%, four dimming curve options
- Pan: 540°
- Tilt: 270°
- Pan and tilt speed: Adjustable via onboard control panel and DMX
- Control and Programming
- Control options: stand-alone DMX channels: 17
- Stand-alone trigger options: Music trig, auto trig
- Stand-alone sequences: 4 pre-programmed shows
- Stand-alone memory: 20 scenes
- Music trig sensitivity: Adjustable
- Setting and addressing: Control panel with backlit graphic display
- DMX compliance: USITT DMX512/1990
- Optics
- Light source: 180 W LED engine
- Minimum LED lifetime: 20 000 hours (to >70% luminous output)(Figure obtained under manufacturer´s test conditions)
- Photometric Data
- Efficacy: 25.5 lumens per watt
- Cut-off angle: 16°
- Total output: 7100 lm
- Construction
- Color: Black
- Housing: High-impact flame-retardant thermoplastic
- Protection rating: IP20
- Installation
- Mounting points: Two quarter-turn brackets for rigging clamps
- Location: Indoor use only, must be fastened to surface or structure
- Orientation: Any
- Connections
- AC power in/thru: Neutrik PowerCon
- DMX data in/out: 3-pin and 5-pin locking XLR
- Electrical
- AC power: 100-240 V nominal, 50/60 Hz
- Typical total power consumption: 280 W
- Power consumption figures are typical, not maximum. Allow for +/-10% variation. :
- Thermal
- Cooling: Forced air, temperature controlled
- Maximum ambient temperature (Ta max.): 40° C (104° F)
- Minimum ambient temperature (Ta min.): 0° C (32° F)
- Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 1010 BTU/hr.
- Approvals
- EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
- EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
- US safety: UL 1573
- US EMC: FCC Part 15 Class A
- Australia/NZ: C-TICK N4241
