Sonnox RESTORE-NATIVE Restore Audio Restoration Native Bundle

Sonnox Restore is a suite of three plug-ins - Oxford DeClicker, Oxford DeBuzzer and Oxford DeNoiser - designed to accurately restore audio recordings that are impaired. Restore represents a quantum leap beyond previous restoration plug-in technology with its advanced algorithms and novel features that allow fast and extremely effective removal of pops, clicks, crackles, scratches, hum, buzzes and extraneous background noise from virtually any recording.

Capable of exceptionally high quality audio repairs, the three plug-ins are intuitive and easy to use, with each interface providing detailed graphical feedback, benefiting the user by saving time which of course is critical in the post-production process.

Sonnox Restore Features:

• DeClicker
  • Three sections with individual thresholds and controls: DePop, DeClick and DeCrackle
  • Event display gives intuitive visual feedback of energy and duration of detected events
  • 'Exclude Box' to select events that should not be repaired
  • Dialogue Mode that allows two separate sets of control settings distinguished by input level
  • Excitation displays to aid accurate setting of threshold controls
  • Three audition modes, including option to listen to only removed events
  • Advanced algorithms for accurate detection and high quality repair
• DeBuzzer
  • High performance hum and buzz removal using advanced algorithms
  • Separate Detect and Remove Sections for intuitive workflow
  • Scalable high resolution FFT of input signal shows strongest harmonics and removal filter
  • Very accurate setting of fundamental over 3 frequency ranges
  • Integrating frequency display shows strength of fundamental
  • Tracking mode can be set to Automatic or Fast to follow fundamentals that wander in frequency, or to Freeze for fundamentals that vary in amplitude
  • Choice of removal filters: Comb for general purpose narrow removal over many harmonics, or Parametric EQ for a more musical removal over a small set of harmonics
  • Two audition modes, including option to listen to the removed buzz
• DeNoiser
  • High performance noise removal using advanced algorithms
  • Separate DeHisser, Detect and Remove Sections for intuitive workflow
  • High resolution FFT of input signal showing noise profile
  • Efficient DeHisser for preparation before wide-band noise reduction
  • Detector noise profile can be set to automatic, freeze or manual
  • Noise threshold and reduction are controllable in frequency bands using adjustable bias curve
  • Two audition modes, including the option to listen to the removed noise
  • Warmth control for sweetening after noise removal
  • Make-up gain for true A/B comparisons

Sonnox Restore Specifications:

• Formats (Native):
• Sample Rates Supported: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
• The sample delays (latency) of each plug-in are as follows:
  • DeClicker:
    • 44.1/48 kHz: 3250/3328
    • 88.2/96 kHz: 6180/6336
  • DeBuzzer:
    • 44.1/48 kHz: 7169
    • 88.2/96 kHz: 14337
  • DeNoiser:
    • 44.1/48 kHz: 12288
    • 88.2/96 kHz: 24576
  • DeClicker:
    • Nominal Pop Duration: 2 ms to 10 ms
    • Nominal Click Duration: 0.1 ms to 3 ms
    • Nominal Crackle Duration: < 0.4 ms
    • Dialogue Mode Voice Threshold: 0 dB to -96 dB
    • Dialogue Mode LF Filter: 20 Hz to (HF -15%)
    • Dialogue Mode HF Filter: (LF+15%) to 20 kHz
    • Minimum Side-Channel Frequency Window: 15%
    • Input Trim: -12 dB to +12 dB
    • Output Trim: -12 dB to 0 dB
  • DeBuzzer:
  • Fundamental Frequency Ranges: 20 Hz to 160 Hz; 160 Hz to 1280 Hz; 1280 Hz to 20 kHz
  • Width of the Frequency Detect Window:
    • Narrow:
      • LF: 3%
      • MF: 2%
      • HF0.5%
    • Normal:
      • LF: 12%
      • MF: 8%
      • HF: 1.5%
    • Wide:
      • LF: 20%
      • MF: 12%
      • HF: 2%
    • Resolution of Frequency Adjustment:
      • Normal: 1.0 Hz
      • Fine: 0.01 Hz
      • Shift-Fine: 0.0001 Hz
    • Bandwidth Range: 75 Hz to 20 kHz
    • Sharp/Q: 16 to 160
    • Attenuation: 0 dB to -144 dB
    • Tone: -96 dB to -6 dB
    • Input Trim: -12 dB to +12 dB
    • Output Trim: -12 dB to 0 dB
  • DeNoiser:
    • DeHisser Section:
      • Cutoff: 3 kHz to 15 kHz
      • Reduction: 0 dB to -24 dB
    • Broadband Denoiser:
      • Threshold: 24 dB to -24 dB
      • Reduction: 0 dB to -24 dB
      • Tune: 3 dB to 12 dB
      • Makeup: 0 dB to 12 dB
    • HF Filter:
      • HF Cut: 1 kHz to 22 kHz
      • Reduction: -18 dB
    • Bias Handles: 18 dB to -18 dB
    • Input Trim: -12 dB to +12 dB
    • Output Trim: -12 dB to 0 dB
  • System Requirements:
  • Pro Tools:
    • Pro Tools 7, 8, 9, 10, 11, 12
    • Approved Pro Tools CPU, OS, and hardware configuration
    • Mac OS X 10.4 or later
      • Pro-Codec and Codec Toolbox compatible with Intel Mac Only
    • Windows XP, Vista, 7, 8
    • 1 GB RAM minimum
    • iLok key with latest drivers
    • iLok 2 required for AAX plug-ins
    • SuprEsser DS compatible with Pro Tools 10/11/12/S3L with approved Pro Tools CPU, OS, and hardware configuration.
  • Audio Units:
    • Audio Units compatible application (Logic, Digital Performer, etc)
    • Mac OS X 10.4 or later
      • Pro-Codec and Codec Toolbox compatible with Intel Mac only
    • 1 GB RAM minimum
    • iLok key with latest drivers
    • iLok2 required for 64-bit plug-ins
  • VST:
  • VST Compatible application (Cubase, Nuendo, Wavelab, Sequoia etc)
  • Mac OS X 10.4 or later
    • Pro-Codec and Codec Toolbox compatible with Intel Mac only
  • 1 GB RAM minimum
  • iLok key with latest drivers
  • iLok2 required for 64-bit plug-ins

No Returns on Software.
Once your software is purchased it is not eligible for returns. Please contact our Sales Pros with questions about compatibility or system requirements prior to purchasing.