RDL DS-TPSL1A

Active Single Pair Sender

OUR PART #:  DS-TPSL1A Write the First Review.

Our Price: $168.12
List Price: $224.88
You save 25%!
  • Stereo Audio Input Combined to Mono Output
  • Input on Dual RCA Jacks or Mini-Jack
  • Switch Selects which RJ45 Pair (A, B or C) is Fed
  • Signal and Power Pair Pass-Through between TP CABLERJ45 Jacks
Learn More
Price-Matching Symbol. Low Price Guaranteed Free Shipping Available FREE Shipping
Usually ships in 6-10 business days.
Need it sooner? Call us!
Pro Buyer Card
Deferred Interest if paid in full within 6 months * Learn More

Related Products

The -TPSL1A modules are single pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources.

The –TPSL1A modules feature a stereo line input through a mini jack or two RCA phono jacks summed to mono. The unbalanced inputs are designed to receive standard -10 dBV consumer level signals. These modules drive only one cable pair, therefore they accept signals and power from other mic-level or line-level Format-A senders. Two other single-pair senders may be chained with the -TPSL1A, or a single two-pair sender may be connected. If three single-pair senders are connected together, each sender must feed a different pair: A, B or C. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.

The -TPSL1A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPSL1A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.

RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

Radio Design Labs DS-TPSL1A Features:

  • Stereo Audio Input Combined to Mono Output
  • Input on Dual RCA Jacks or Mini-Jack
  • Switch Selects which RJ45 Pair (A, B or C) is Fed
  • Signal and Power Pair Pass-Through between TP CABLERJ45 Jacks
  • Remote Powering through Twisted Pair Cable
  • Fused Local Power Feeds all Connected Modules
  • Local Power Input on Terminal Block
  • Blue LED Indicates Module is Powered
  • Daisy-Chain with Single-Pair or Two-Pair Format-ASenders
  • Studio-Quality Precision Active Balanced Circuitry

Radio Design Labs DS-TPSL1A Specifications:

  • Input: 10 kO unbalanced (left and right)
  • Input Connection: Mini-jack or dual RCA phono jacks
  • Input Level: -10 dBV
  • Format-A Signal Pair Used: Switch-selectable A, B, or C
  • Format-A Input: RJ45
  • Output: RDL TP Format-A
  • Output Connection: RJ45
  • Frequency Response: 20 Hz to 20 kHz (+/- 0.25 dB)
  • THD+N: < 0.05% (20 Hz to 20 kHz)
  • Noise: < -90 dB
  • Headroom: > 18 dB
  • Indicator: Power In
  • Power Connections (2): Detachable terminal block; RJ45
  • Power Requirement: 24 Vdc @ 25 mA plus connected loads
  • Dimensions: 1.6" (4.06 cm) W; 4.11" (10.45 cm) H;1.89" (4.8 cm) D
  • Mounting Box Minimum Depth: 2.4" (6.1 cm)
  • Ambient Operating Environment: 0° C to 55° C
RDL DC-4G  Desktop or Wall-Mounting Decora Remote Control or Panel Chassis (Gray)

RDL DC-4G Desktop or Wall-Mounting Decora Remote Control or Panel Chassis (Gray)

Radio Design Labs' DC-4G desktop chassis holds four Decora®-style products, including RDL remote controls and connector plates.  Installation is facilitated using the included mounting plate, which allows the chassis to mount to ...
$96.22 List Price: $128.71You Save 25%
In Stock
Free Shipping AvailableFree Shipping
RDL WB-1U Single-Gang Universal Wall Box

RDL WB-1U Single-Gang Universal Wall Box

Can be mounted in International or US walls and cabinets. Features side and rear mounting holes which secure the box in new construction. Also has folding tabs which secure the box in an existing wall or cabinet.Dimensions: Height: 4.125 ...
$14.68 List Price: $17.32You Save 15%
In Stock
RDL CP2-S CP-2S

RDL CP2-S CP-2S

Dimensions: 4.55" x 4.55" (11.6 x 11.6 cm)
$12.44 List Price: $14.67You Save 15%
In Stock
RDL DC-4W  Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels, White

RDL DC-4W Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels, White

The Radio Design Labs DC-4W desktop chassis holds one, two, three or four Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis ...
$96.22 List Price: $128.71You Save 25%
Usually ships in 6-10 business days.
RDL DC-3G  Desktop/Wall-Mounted Chassis for Decora® Remote Controls and Panels

RDL DC-3G Desktop/Wall-Mounted Chassis for Decora® Remote Controls and Panels

Radio Design Labs' DC-3G desktop chassis holds three Decora®-style products, including RDL remote controls and connector plates.  Installation is facilitated using the included mounting plate, which allows the chassis to mount ...
$82.30 List Price: $110.08You Save 25%
Usually ships in 6-10 business days.
RDL DC-3W White Desktop or Wall-Mounted Chassis for Decora® Remote Controls and Panels

RDL DC-3W White Desktop or Wall-Mounted Chassis for Decora® Remote Controls and Panels

Radio Design Labs' DC-3W desktop chassis hold three Decora®-style products, including RDL remote controls and connector plates.  Installation is facilitated using the included mounting plate, which allows the chassis to mount to a ...
$82.30 List Price: $110.08You Save 25%
Usually ships in 6-10 business days.
RDL DC-3B  Triple Desktop/Wallmount Chassis for Decora Panels

RDL DC-3B Triple Desktop/Wallmount Chassis for Decora Panels

The DC-3B desktop chassis holds one, two or three Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop ...
$82.30 List Price: $110.08You Save 25%
Usually ships in 6-10 business days.
RDL RM-D9 3RU Rack Panel Mount for 9 Decora Models

RDL RM-D9 3RU Rack Panel Mount for 9 Decora Models

Radio Design Labs' RM-D9 is a 3 RU rack panel that allows the mounting of 9 Decora products, such as RDL remote controls and D-Series connector plates. The installer can label each installed module behind an included protection lens.The ...
$70.06 List Price: $93.71You Save 25%
Usually ships in 3 business days.
RDL DC-2G  Wall Mount Chasis for Decora

RDL DC-2G Wall Mount Chasis for Decora

The DC-2G desktop chassis holds two Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a ...
$68.58 List Price: $91.74You Save 25%
Usually ships in 6-10 business days.
RDL DC-2W Desk Top Chassis for Decora, White

RDL DC-2W Desk Top Chassis for Decora, White

The DC-2W white desktop chassis holds two Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a ...
$68.58 List Price: $91.74You Save 25%
Usually ships in 6-10 business days.
RDL DC-2B-RDL Desktop or Wall Mount Chasis for Decora Remote Controls and Panels in Black

RDL DC-2B-RDL Desktop or Wall Mount Chasis for Decora Remote Controls and Panels in Black

Radio Design Labs' DC-2B desktop chassis holds one or two Decora®-style products, including RDL remote controls and connector plates.  Installation is facilitated using the included mounting plate, which allows the chassis to mount ...
$68.58 List Price: $91.74You Save 25%
Usually ships in 6-10 business days.
RDL RM-D3 1RU Rack Panel Mount for 3 Decora Models

RDL RM-D3 1RU Rack Panel Mount for 3 Decora Models

Radio Design Labs' RM-D3 is a 1 RU rack panel that allows the mounting of 3 Decora products, such as RDL® remote controls and D-Series connector plates. The installer can label each installed module behind an included protection lens. The ...
$60.26 List Price: $80.60You Save 25%
Usually ships in 4 business days.
RDL DC-1G  Wall Mount Chasis for Decora

RDL DC-1G Wall Mount Chasis for Decora

The DC-1G desktop chassis holds one Decora®-style product, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a vertical ...
$54.58 List Price: $72.98You Save 25%
Usually ships in 3 business days.
RDL DC-1W  Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels

RDL DC-1W Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels

The Radio Design Labs DC-1W desktop chassis holds one Decora-style product, which includes RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a ...
$54.58 List Price: $72.98You Save 25%
Usually ships in 4 business days.
RDL DC-1B  Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels, Black

RDL DC-1B Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels, Black

The Radio Design Labs DC-1B desktop chassis holds one Decora®-style product, which includes RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a ...
$54.58 List Price: $72.98You Save 25%
Usually ships in 6-10 business days.
RDL SMB-2G Gray Dual-Gang Surface Mount Boxes for 2 Decora Remote Controls and Plates

RDL SMB-2G Gray Dual-Gang Surface Mount Boxes for 2 Decora Remote Controls and Plates

Radio Design Labs' SMB-2G dual-gang surface mount boxes holds two Decora®-style products, including RDL remote controls and connector plates.  Knockouts are provided for fastening standard metric or North American conduits to the ...
$44.46 List Price: $59.46You Save 25%
Usually ships in 3 business days.
RDL SMB-1G  Single-Gang Gray Surface Mount Boxes for Decora-Style Devices

RDL SMB-1G Single-Gang Gray Surface Mount Boxes for Decora-Style Devices

Radio Design Labs' SMB-1G surface mount boxes holds one Decora®-style products, including RDL remote controls and connector plates.  Knockouts are provided for fastening standard metric or North American conduits to the rear of the ...
$40.89 List Price: $54.69You Save 25%
Usually ships in 6-10 business days.
RDL SMB-1B  Surface Mount Boxes for Decora

RDL SMB-1B Surface Mount Boxes for Decora

Radio Design Labs SMB-1B holds one Decora®-style product, including RDL remote controls and connector plates. Knockouts are provided for fastening standard metric or North American conduits to the rear of the box and to either the upper ...
$40.88 List Price: $54.69You Save 25%
Usually ships in 6-10 business days.
RDL WB-2U Dual-Gang Universal Wall Box

RDL WB-2U Dual-Gang Universal Wall Box

Can be mounted in International or US walls and cabinets. Features side and rear mounting holes which secure the box in new construction. Also has folding tabs which secure the box in an existing wall or cabinet.Dimensions: Height: 4.125 ...
$15.84 List Price: $18.68You Save 15%
Usually ships in 4 business days.
RDL CP4-S CP-4S

RDL CP4-S CP-4S

For use with RDL SMB-4 and DC-4 for mounting RDL remote controls and jack panels.  Compatible with Decora style products and American electrical boxes.Shipping Weight: 0.16 lbsPackage Dimensions: 7" x 9"
$14.39 List Price: $16.98You Save 15%
Usually ships in 6-10 business days.
RDL CP2-G CP-2/G

RDL CP2-G CP-2/G

For use with RDL R style remote controls and D style connector plates; Mount with RDL WB-2U Universal Wall Box. 
$12.44 List Price: $14.67You Save 15%
Usually ships in 3 business days.
RDL CP1-W Wall Plate, Single Cover Plate, White

RDL CP1-W Wall Plate, Single Cover Plate, White

For use with RDL R style remote controls and D style connector plates; Mount with RDL WB-1U Universal Wall Box.
$11.43 List Price: $13.49You Save 15%
Usually ships in 4 business days.
RDL CP1-S CP-1S

RDL CP1-S CP-1S

The Radio Design Labs CP-1S is a single gang decora cover plate in stainless steel.Dimensions: 4.55" H x 2.8" W (11.6 x 7.1 cm)Package Dimensions: 2" x 3"Shipping Weight: 0.072 lbs
$11.45 List Price: $13.49You Save 15%
Usually ships in 6-10 business days.
RDL CP1-G CP-1/G

RDL CP1-G CP-1/G

Radio Design Labs' CP-1G is for use with RDL SMB-1, DC-1 and WB-1U for mounting RDL remote controls and jack panels.  Compatible with Decora style products and American electrical boxes.Height: 4.55" (11.6 cm)Width: 2.80" (7.1 cm)
$11.44 List Price: $13.49You Save 15%
Usually ships in 4 business days.

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information