EAW MW10-BLACK MicroWedge MW10 500W @ 8 Ohms 10" MicroWedge Series Stage Monitor

The EAW MicroWedge MW10 is collaboration between original MicroWedge Series inventor Dave “Rat” Levine (owner of Rat Sound Systems, Inc.) and the EAW Engineering Department, resulting in dramatically upgraded performance and ergonomics. The coaxial design pairs a 10-inch woofer with a 1.75-inch voice-coil compression driver to provide full yet controlled 90-degree conical dispersion.

All frequencies emanate from the exact same point, eliminating crossover region problems and time/phase irregularities, as well as optimizing coherency. The coaxial approach also contributes to a very compact, low-profile footprint.

The port on the front of the cabinet enhances LF response in coupling with the floor, the opening also houses a convenient carrying handle and dual NL4 connectors.

The MW10 enjoys the advantage of working equally well as a stage monitor or as a console bridge monitor. It was designed with a sturdy balance so that when set upright (on its backside) it rests easily on either side of a console bridge. A conveniently located pair of NL4 connectors further simplifies console setup. An optional pole mount is also available.

The MW10 monitor is protected with EAW’s RoadCoatTM which provides tremendous scratch resistance, and the rugged steel grille keeps its distinctive shape even if stood upon. Points for Omni-mount plates are located the bottom of the MW10 to aid in hanging the monitors.

For applications that require enhanced performance the MW10 can be optimized using the EAW UX8800 digital signal processor.

EAW MicroWedge MW10 Features:

• Highly coherent coaxial design (10-inch woofer,vented)
• Enhanced fidelity and power handling
• Upgraded transducers and crossover design
• Convenient input connector location
• Sturdy balance for console bridge monitor use
• 6-year warranty from EAW

EAW MicroWedge MW10 Specifications:

• Subsystem:
  • LF: 10-in cone, vented, coaxial with HF
  • HF: 1-in exit compression driver, horn-loaded
• Operating Mode:
  • Single-amp LF/HF
  • High pass filter
• Operating Range (-10 dB): 65 Hz – 20 kHz
• Axial Sensitivity (1W @ 1m) Full Range: 95 dBSPL
• Power Handling / Impedance Full Range: 500W @ 8Ohms
• Calculated Maximum Output Peak Full Range: 128dB SPL
• Calculated Maximum Output Long Term Full Range: 122 dB SPL
• Nominal Coverage:
  • Horizontal: 90°
  • Vertical: 90°
• Powering: Full Range
• Dimensions:
  • Height (min. stage): 11.36" (288.5mm)
  • Width (front): 10.06" (256mm)
  • Width (rear): 14.26 (362mm)
  • Depth: 18.41 (468mm)
• Trap. Angle (degrees per side): 6.5°
• Floor (degrees up): 27°
• Weights:
  • Net: 27 lbs (12.2 kg)
  • Shipping: 41 lbs (18.6 kg)