RTS BTR800-4PIN-M 2-Channel UHF Synthesized Wireless Intercom Base Station

Enjoy the ultimate in reliable, high-performance, full-duplex communication

The BTR-800 system includes the BTR-800 frequency-agile base station, working with up to four TR-800 or TR-825 frequency-agile beltpacks (sold separately). It provides full-duplex communications with the beltpacks, and incorporates two audio channel operation, permitting the operator to choose between two separate audio channels, with the base station tracking the beltpack selection, enabling the flexibility to create a party line and a private line within the same beltpack. This system is fully suited for standalone operation and can interface with Telex Audiocom, RTS Two-Wire Intercom, Clear-Com®, as well as RTS Digital Matrix Intercom systems and other 4-wire communications systems. It provides connections for auxiliary balanced audio input and output, as well as wireless talk-around (WTA) and stage announce (SA) features. Operating in the 470 to 740MHz range, the units operate reliably at line-of-sight distances of 1,000'. And with other available antenna systems, the effective operating range can be extended as well.

Features

• Frequency-agile base station and beltpacks
• Backlit base station LCD
• ClearScan function
• Full-duplex operation
• Compatible with Audiocom, RTS TW, Matrix, Clear-Com and others

Specifications

• RF Frequency Range: 470 - 608 MHz, 614 - 740 MHz in 18 MHz TX and RX bands
• Power Requirements: 100-240 VAC, 50-60 Hz, IEC receptacle
• Temperature Range: -4 °F to 130 °F (-20 °C to 55 °C)
• TX Antenna: ½-wave (supplied), TNC Male Connector
• RX Antenna: ½-wave (supplied), TNC Male Connector
• FCC ID: B5DM514
• Frequency Response: 300 Hz - 8 kHz
• 4-Wire Input and Output: Level Adjustable (2 Vrms typical)
• Telex RadioCom Intercom:
  • Input/Output Level Adjustable (1 Vrms typical), Line
  • Impedance 300 Ω
• RTS Intercom:
  • Input/Output Level Adjustable (0.775 Vrms typical), Line
  • Impedance 200 Ohms
• Clear-Com Intercom
  • Input/Output Level Adjustable (1 Vrms typical), Line
  • Impedance 200 Ω
• Auxiliary Input: Adjustable (2 Vrms typical)
• Auxiliary Output: Adjustable (2 Vrms typical into 600 Ω)
• Stage Announce Output: Internally Adjustable (2 Vrms typical at rated deviation into 600 Ohms)
• Stage Announce Relay: Dry contact, rated at 1 Amp, 24 V Max
• Microphone Input Sensitivity: 9 mV
• Local Headset Output: 40 mW output into 600 Ω (1% Distortion)
• Dimensions (W x H x D): 19" x 1.72" x 14" (48.3 x 4.4 x 35.6cm)
• Weight: 7 lbs., 2 oz. (3.24 kg)
• Note: specifications and further information can be found within the items located under the "Documentation" tab above.