Call Us for your best package
pricing and product availability.
OUR PART #: B126-1P0 MFR #: B126-1P0
The Tripp Lite B126-1P0 is a receiver unit that is used with the B126-002 and B126-004 transmitter units. It extends a 1080p (60Hz) signal to a monitor up to 50 ft ... Read more
Questions? Contact our
Sales and Service Pros for expert
advice and package pricing.
Email customer service
The Tripp Lite B126-1P0 is a receiver unit that is used with the B126-002 and B126-004 transmitter units. It extends a 1080p (60Hz) signal to a monitor up to 50 ft. away using Cat5e/6 cable. To achieve maximum distance and resolution, use 24Awg Solid Wire Cat5e/6 cable. (Tripp Lite's N202-Series) No power is required, and its built-in HDMI male connector plugs directly into a monitor without the need for an additional cable. Supports 24-bit True Color (8-bits per channel), HDCP, 3D, and both stereo audio and 7.1 channel surround sound audio (7.1 channel surround sound signal will be Multi-Channel or PCM).
Installation is simple. Connect the transmitter unit to an HDMI source using a Tripp Lite P568-Series HDMI cable (not included). Connect the built-in HDMI connector on the receiver unit directly to a display. Finally, connect the receiver to the RJ45 port on the transmitter using a single Cat5e/6 cable.
-A 1080p (60Hz) signal can be transmitted up to 50 ft.
-A 1080i (60Hz) signal can be transmitted up to 100 ft.
-Cannot be used for a 3D signal
Specifications are subject to change without notice.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
There are no reviews to display with the selected filters.
This reviewer left no comment.
Thank you for submitting your comment. It is in a queue to be moderated.
When They say up to 100ft ,for 1080i they are stretching it. Tried on two different brands of cat5 and signal was intermittent at 95ft.
Thank you for submitting your comment. It is in a queue to be moderated.
Product didn’t work
Thank you for submitting your comment. It is in a queue to be moderated.