DB Technologies DVA S2585N 18" Active Cardioid Subwoofer, 2500W

The DVA S2585N is a compact subsystem featuring a cardioid layout designed for utmost directivity.

The system consists of two separate chambers, one loaded with a forward facing 18“ woofer and another with a rearward facing 15“ woofer.

The integrated digipro®G2 digital power amps provide 2500W total output power.

The high-quality DSP filters signals and controls the speakers to deliver a remarkably authentic audio image and faithful transient response.

The housing is ready to fly with the optional SRK10 Rigging Kit is all it takes to put up flown cardioid sub arrays.

Many systems lack low-frequency directivity and, as a result, are plagued by interference and annoying noise.

The S2825N, in contrast, was engineered specifically for enhanced low-frequency directivity.

And it not only sounds great, it is also easy to handle and transport.

Factory-equipped with an RDnet port, this subwoofer is ready for integration into elaborate, remotely controlled and monitored DVA T12 sound reinforcement systems via RJ45 inputs and outputs that connect the units to the RDnet hub.

Specifications:

• Speaker Type: Active Cardiod-Subwoofer
• Acoustical data
  • Frequency Response [+/- 3dB]: 35 - 120 Hz
  • Max SPL: 140 dB
  • Directivity: Cardiod
  • LF: 18+15 "
  • Voice Coil LF: 4 "
• Amplifier
  • Amp Technology: Digipro® G2
  • Amp Class: Class D
  • Power Supply: 2.5 kW SMPS
  • LF Amp: 2500 W RMS
  • Cooling: Convection
• Processor
  • Controller: DSP 56 bit
  • AD/DA Converter: 24bit/ 96 kHz
  • System Presets: X-Over,Delay
  • Phase: 0, 180 °
  • Limiter: RMS, Peak, Thermal
  • Delay Option: 0-4.5 ms internal
  • Crossover Frequency LF-MF: 75-120Hz | steps of 5Hz
  • LF-Xover out slope: 24 dB/Octave
• Mechanics
  • Housing: Multiplex birch plywood
  • Housing Design: Rectangular
  • Handles: 3x Per Side
  • Accessory: Dolly, Dust Cover, Rain Cover
  • Pole Mount: M20
  • Rigging Points: integrated for SRK10 fly kit 2xPick Points on top to fix DRK10/20 rigging frames
  • Dimensions: 20.6"W x 25.6"H x 40"D
  • Weight: 143.3 lbs