Product Overview
The MXW6/C is a cardioid boundary transmitter for use with the Microflex Wireless systems.
An earphone output allows users to hear audio from a return channel for translation, cueing, or program material.
Microflex Wireless Transmitters deliver lifelike sound, intelligent wireless performance, advanced rechargeability, and AES 256-bit encryption for secure transmission. Each transmitter offers bi-directional wireless capabilities, enabling return channel audio and real-time remote control and monitoring of all settings, including battery status, plus a 100-foot working range, with an alert that sounds so users know when range is exceeded.
Microflex™ Wireless brings these features to signature boardrooms and AV conferencing environments that require high-quality, low-profile condenser microphones.
Applications
- Boardrooms
- Corporate Theaters
- AV Conferencing Spaces
- Training/Seminar Centers
Features
- Wide frequency response: Full range audio for clear voice transmission
- Microflex capsules: Well known and trusted Microflex sound signature
- Bi-directional wireless: Enables return channel audio and real time remote control of all wireless microphone settings
- Earphone output: Listen to audio from a return channel for translation, cueing, or program material
- Concealed power switch: Prevents accidental powering off
- Programmable mute button: Customise local or remote muting behavior per application, with options including push-to-talk, push-to-mute, and external control
- Encrypted wireless: AES 256-bit encryption for secure transmission
- Wide working range: Reliable wireless coverage extends up to 160 feet (50 meters)
- Out of range alert: Emits beeping sound when range limit is exceeded
- Easy wireless linking: Assign the microphone to an Access Point channel by simply docking it in a Networked Charging Station and pressing “link”
- Advanced Li-ion batteries: Smart lithium-ion internal batteries (included) provide up to 9 hours of continuous use, charge to full in 2 hours, and enable remote monitoring over the network of remaining runtime and charge status in hours and minutes
- Standby mode: Enabled remotely during periods of inactivity to significantly extend battery life when not in use
- Low-battery LED: Visually alerts when there is 30 minutes of charge remaining
- USB charging: Connects to any standard USB power source for “always on” usage
Specifications
- RF Carrier Frequency Range USA, Canada, Mexico: Z10 (1920–1930 MHz)
- Working Range: 50 m (160 ft) (actual range depends on RF power setting and signal absorption, reflection and interference)
- Audio Frequency Response: 50 Hz – 20 kHz (+1, -3 dB) (dependent on microphone type)
- Dynamic Range: >99 dB, A-weighted
- System Gain (Mic gain @ 0dB to line level output on MXWANI through Dante): +50 dB
- Latency: 18 ms, nominal
- System Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage on pin 3 of TA4M
- connector) produces a positive voltage on pin 2 of the ANI (with respect to pin 3 of the low-impedance output).
- Radio Transmission: Time Division Multiple Access (TDMA), Gaussian Frequency Shift Keying (GFSK), 365 kHz max. deviation
- RF Sensitivity: -87 dBm, minimum
- Power: 19 dBm (80 mW) maximum, See Frequency Range and Output Power table
- Cable Requirements: Cat 5e or higher, shielded, 100 m maximum between network devices
- Network Addressing Capability: DHCP, link-local, static
- Operating Temperature Range: 0°C (32°F) to 49°C (120°F)
- Storage Temperature Range: -29°C (-20°F) to 74°C (165°F)
