Product Overview
Neutrik's preassembled etherCON CAT6 patch cable uses a shielded S/FTP cable with cable plug carrier offering a robust metal shell and Push-Pull locking system.
Features
- CAT6 compliant - data rate up to 10 GBit/s
- CAT6 performance - fast data transmission and high bandwidth applications
- CAT6 specifications according TIA / EIA 568B, ISO /IEC 11801, EN 50173
- IP65 - Dust and waterproof in mated condition
- Shielded system - high noise immunity and EMI protection
- Push Pull mating - secure and proven locking system
- Ready-made patch cables with rugged cable carrier and unique chuck-type strain relief
Specifications
- Electrical Specifications:
- Contact resistance: < 10 mOhm (inner)
- Dielectric strength: 1 kVdc
- Frequency Range: 1 - 250 MHz
- Insulation resistance: = 0.5 GOhm
- Rated current per contact: 1,5 A
- Rated voltage: 50 V
- Mechanical Specifications:
- Insertion force: = 40 N
- Withdrawal force: = 20 N
- Lifetime: > 1000 mating cycles
- Wiresize: 8 x AWG 27/7 mm²
- Locking device: Push-Pull
- Material Specifications:
- Boot: Polyurethane
- Contact plating: 0.7 µm Au over 1.2 µm Ni plating
- Contacts: Bronze (CuSn8)
- Insert: Polyamide (PA 6.6 30 % GR)
- Shell: Zinc diecast (ZnAl4Cu1)
- Shell plating: Nickel
- Strain relief: Polyacetal (POM)
- Environmental Specifications:
- Flammability: UL 94 HB
- Standard compliance: CAT6, Class E acc. TIA/EIA 586B,IEC11801, EN 50173
- Protection class :IP 65
- Temperature range: -10 °C to +60 °C
Note
NOTE: The cable plug carrier is only found on ONE end of this cable.