Product Overview
The GefenPRO 3GSDI Scaler for HDMI and DVI converts both HDMI and DVI to single-link or dual-link SDI / HD-SDI / 3G-SDI formats. Resolutions can be scaled up to 1080p Full HD, 1920 x 1200, and 2K. Genlock frame synchronization and up to eight channels of audio are supported. This unit provides high-performance scaling plus adaptive video interlacing with edge interpolation, advanced noise reduction, alpha blending, image enhancement, and a fully-integrated menu system. It also supports SDI, ED-SDI, HD-SDI, and 3G-SDI SMPTE formats. The built-in S/PDIF coaxial output can be used to send digital audio to a separate A/V receiver. The GefenPRO 3GSDI Scaler for HDMI and DVI provides superior 3G-SDI video packaged in a single-rack mount 1U tall unit with an internal power supply.
Included in Box:
- (1) HDMI and DVI to 3GSDI Scaler w/Frame Synchronizer (GEF-HDVI-2-3GSDIS)
- (1) 6 ft. Dual Link DVI Cable (CAB-DVIC-DL-06MM)
- (1) 6 ft. Locking HDMI Cable (M-M) (CAB-HD-LCK-06MM)
- (1) AC Power Cord (CAB-POWERCORD-XX)
- (1) Rack Ears (EXT-RACK-19-BLK)
- (1) IR Remote Control (RMT-8HDS-IRN)
- (1) Quick-Start Guide (QSG-GEF-HDVI-2-3GSDIS)
Features:
- Converts HDMI and DVI to all single-link or dual-link SDI formats
- HDMI and DVI inputs switchable via IR, RS-232, and front panel
- Input Resolutions up to 1080p Full HD, 1920 x 1200, and 2K
- 10-bit Deep Color
- LPCM 7.1, Dolby® TrueHD, and DTS-HD® Master Audio™ pass-through
- Frame rate conversion
- Supports black burst (bi-level sync) and tri-level sync Genlock
- Advanced noise reduction and detail enhancement
- Fully integrated sprite based multi-plane OSD menu system
- Pattern generation of color bars and cross-hatch patterns
- Four aspect ratio modes (Full Screen, Panoramic, Letter/Pillar,Extract/Crop)
- Film Mode produces a progressively scanned output image from an interlacedscanned input image
- Serial (RS-232) control for automation
- Field-upgradeable firmware via USB port
- 1U tall and rack-mountable rack ears included
Specifications:
- Maximum Pixel Clock: 225 MHz
- Video Input Connectors:
- (1) HDMI Type A 19-pin, female, locking
- (1) DVI 29-pin, female, digital only
- Video Output Connectors: (2) BNC, female
- Output Video Bandwidth: 3.0 Gbps (max.)
- Supported standards:
- SD-SDI (SMPTE 259M)
- ED-SDI (SMPTE 344M)
- HD-SDI (SMPTE 292M)
- Dual-Link HD-SDI (SMPTE 372M)
- 3G-SDI (SMPTE 424M/425M-AB)
- Sync Reference Input Connector (Genlock): (1) BNC, female
- Audio Connector: (1) S/PDIF Coaxial (RCA female)
- USB Connector: (1) USB 2.0 Type B, female (for firmware update)
- RS-232 Port: (1) DB-9, female
- HDMI/DVI Input Selector: (1) tact-type
- Power indicator: (1) LED, blue
- 3GSDI indicator: (1) LED, green
- HDMI Input indicator: (1) LED, green
- IR Sensor: (1) on front panel
- Power Switch: (1) rocker-type, on back panel
- Power Supply: 100 - 240V AC, 50/60 Hz (Internal)
- Power Consumption: 20W (max.)
- Dimensions (W x H x D - without rack ears): 17" x 1.73" x 7.7" (432 mm x44mm x 195mm)
- Shipping Weight: 6.5 lbs (3 kg)