Lab Gruppen IPD 1200 Stereo Power Amplifier with Onboard DSP, 600W per Channel at 4 Ohms

The Lab.Gruppen IPD 1200 is a 600W per channel @ 4 ohms stereo power amplifier with onboard DSP and ethernet-based networking. With AES3 digital inputs standard, IPD Series amplifiers connect directly to digital console stage boxes, eliminating a DA/AD conversion cycle. AES3 inputs can be set for automatic failover to analog, and input mixing is available for all four inputs. At the power output end, connections are available on binding posts or Neutrik speakON. At the heart of the IPD platform is a latest-generation DSP engine equipped with up to a total of 40 real-time, multi-slope parametric EQs along with adjustable gain, input and output delay, and both high- and low-pass filters adjustable to any frequency. All setup parameters for input mixing, DSP features and limiter setting are accessible on the front panel using two navigation buttons, a rotary encoder, and the backlit display. Individual channel mute buttons are also available. Up to 100 user-defined presets may be stored on-board. Network configuration is fast and foolproof, with automatic discovery and identification of all connected amplifiers. The sleek GUI is designed for touch-based devices, and enables quick grouping of amplifiers along with intuitive setup and preset storage of all DSP parameters. Extraordinary flexibility, high power density and competitive cost make IPD Series amplifiers equally at home whether in permanent installations, portable corporate AV systems, or touring band rigs.

Features

• High power density with up to 1200W in single-rackspace design
• Low mains current draw with proven IDEEA technology
• AES3 and analog inputs with redundant failover
• Link outputs for analog and AES3
• Ethernet network connection

Specifications

• Number of channels: 2
• Max Total Output All Channels Driven: 1200 W
• Peak Output Voltage per Channel: 50 Vrms
• Max. Output Current per Channel: 16 Arms
• Max. Output Power Per Channel (All ChannelsDriven):
  • 2 ohms: 500 W
  • 4 ohms: 600 W
  • 8 ohms: 300 W
  • 16 ohms: 150 W
• THD 20 Hz - 20 kHz for 1 W:
• THD at 1 kHz and 1 dB below clipping:
• Signal To Noise Ratio: >105 dBA
• Channel Separation (Crosstalk) at 1 kHz: >80dB
• Frequency Response: 2 Hz - 42 kHz
• Input Impedance: 18k Ohm
• Common Mode Rejection (CMR:) 50 dB
• Output Impedance: 25 Megohms
• SCVPL: 70 V peak
• Sensitivity for Full Power: 6 dBu
• Gain (all DSP controls set to 0dB): 33.2 dBu
• Level adjustment (per channel): Software controlled from -inf to 0 dB
• Analog Input Connectors (per ch.): Neutrik XLR, 3-pin female
• Analog Input Link Connectors (per ch.): Neutrik XLR, 3-pin male
• AES Input Connectors (per ch.): Neutrik XLR, 3-pin female
• AES Input Link Connectors (per ch.): Neutrik XLR, 3-pin male
• Output Connectors (per ch.): Neutrik speakON /binding post
• Buttons: Power, Menu, Back, Mute (per ch.), Power
• Encoder: Adjust / Set
• Cooling: Single fan, front to rear airflow, no filter required, temperature controlled speed
• Nominal voltage: 100 - 240 VAC
• Operating voltage: 60 - 265 VAC
• Standby consumption: < 6.5 W
• Mains connector: IEC inlet (locking)
• Dimensions (Rack rail to rear panel, WxHxD): 19" x 1 RU x 10.7"
• Dimensions (Overall incl. handles and rear support, WxHxD): 19" x 1 RU x 13.5"
• Weight: 10.1 lbs
• Finish: Black anodized aluminum front and black/ gray steel chassis
• Approvals: CE, PSE, UL 60065, CAN/CSA-C22.2, No.60065:03, FCC part 15Class A, EN 55103-1, EN55103-2, ROHS