NTI 600-000-411

Exel Acoustics Set with XL2 Acoustic Analyzer, M2211 Microphone (Class 1), and More

OUR PART #: 600-000-411 Write the First Review.

NTI's Exel Acoustic Set contains all instruments and accessories for precise acoustic measurements and analog audio testing.
Learn More
Our Price: $3,409.20
List Price: $3,436.00
Price-Matching Symbol. Low Price Guaranteed Free Shipping Available FREE Shipping
Usually ships in 7-14 business days.
Need it sooner? Call us!

Related Products

NTI's Exel Acoustic Set contains all instruments and accessories for precise acoustic measurements and analog audio testing.  Comes with the M2211 measurement microphone (Class 1).  The System Case protects the complete set during transport.

NTI's Exel Set includes:

  • XL2 Acoustic Analyzer
  • M2211 microphone
  • XL2 ASD cable
  • XL2 Power Supply
  • MR-PRO Minirator
  • MR-PRO Power Supply
  • MR-PRO Cable Test Plug
  • XL2 System Case

NOTE: Exact contents of the case shown in the picture above may not match those included with purchase of this Exel Acousics Set.

XL2 Sound Level Meter Features:

  • Standards IEC 61672, IEC 60651, IEC 60804, ANSI S1.4, ANSI S1.43, DIN 15905-5, DIN 45645-2, SLV 2007, GB-T_4959-1995, Technical code for public address system engineering (upcoming Chinese standard) and optional DIN 45645-1.
  • Sound Level Leq, Lmin, Lmax, Lpeak, live, ...
  • Frequency weighting: A, C, Z (=flat)
  • Time weighting: Fast, Slow
  • Recording of WAV-files (ADPCM) and voice notes
  • Limit monitoring showing exceeding sound levelsReal Time Spectrum RTA: 1/3 octave, 1/1 octave

The MR-PRO is an extremely powerful analog audio generator to satisfy every need for the professional engineer. Proprietary user wave forms may be loaded via USB into the internal flash memory.

Innovative and unique technology includes continuous monitoring of the impedance of the connected load, the signal balance and the phantom power. Plus the integrated cable testing promotes MR-PRO to the level of a cable analyzer, simplifying trouble shooting tasks. MR-PRO includes all functions of the Minirator MR2.

Generator Functions:

  • Sine Waveforms, freely selectable frequencies, up to +18 dBu
  • Sweep Signals, any frequency interval up to 1/12 octave
  • White Noise, Pink Noise
  • Polarity Test Signal
  • Delay Test Signal

Measurement Functions:

  • Balance
  • Load Impedance
  • Phantom Power Voltage

Cable Test
The built-in cable tester verifies the proper 1:1 pin connection through any cable connected between the XLR output and the built-in XLR input. Alternatively an optional Cable Test Plug may be used for single ended installations.

Store Preset Configurations
Up to 10 complete instrument configurations can be stored in the internal flash memory and reloaded for repetitive tasks. The saved settings may also be transferred to other MR-PRO instruments.

True Level Output Stage
The compensated output stage of MR-PRO precisely stabilizes to the specified output level over a wide range of varying loads. Possible deviations at reaching the output current limit are clearly indicated.

Sine Output
MR-PRO generates extremely pure sinusoidal waveforms with:

  • Freely selectable frequencies from 10 Hz to 20 kHz
  • Level range from -80 to +18 dBu

The start frequency, stop frequency and a step resolution as fine as 1/12th of an octave can be adjusted. Analyzers like the Minilyzer automatically trigger to this signal and record the frequency response of a device under test.

The chirp signal is a sine-wave with defined start- & stop frequency and continious frequency increase over time. It is used in the recording of frequency responses, the measurement of impulse responses and the acoustic assessment of rooms.

Delay Test Signal
This is the designated reference signal to measure the acoustics progagation delay time from speaker to speaker in e.g. churches or auditoriums. Testing is carried out in combination with the Acoustilyzer AL1.

Pink & White Noise
Pink or White Noise is synthesized with high spectral density, normal amplitude distribution and with infinite cycle duration. An automated on-off cycle mode for convenient RT60 measurements with the Acoustilyzer AL1 is included.

The saw-tooth waveform of the polaritytest signal is an ideal stimulus with only moderate stress to speakers. Minilyzer ML1 and Acoustilyzer AL1 take advantage of this and correctly analyzes the polarity of the incoming signal.

Wave File
A number of user test signals may be stored as uncompressed WAV-files in the MR2-PRO memory. The selected file is seamlessly looped. Data exchange is simplified via the USB port.

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available

Call a Sales Pro at 800-356-5844 for more information