Kramer WP-572/US(W) HDMI Over Twisted Pair Receiver

The WP-572 is a DGKat™ twisted pair receiver for HDMI signals. The WP-571 converts an HDMI signal to a single twisted pair signal and the WP-572 converts the twisted pair signal back to an HDMI signal.

Available Finishes:

• White
• Off-White
• Grey

Features:

• Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel).
• HDTV Compatible.
• HDCP Compliant.
• DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.
• HDMI Support - x.v.Color™, up to 7.1 Uncompressed Audio Channels.
• 3D Pass-Through.
• System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC-DGKat524 cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC-DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC-DGKat7a23 cable.
• Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's BC-DGKat524, BC-DGKat623 and BC-DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
• EDID PassThru - Passes EDID signals between the source and display.
• ON LED - Lights red when receiving power only, orange when either input or output and power are attached, and green when both an active input and output are attached.
• Power Connect™ System - A single connection to the transmitter powers the receiver.

Specifications:

• Inputs: 1 DGKat™ twisted pair on a RJ-45 connector.
• Outputs: 1 HDMI Connector.
• Bandwidth: Up to 4.95Gbps data rate (1.65Gbps per graphics channel).
• Compliance with HDMI Standard: Supports HDMI and HDCP.
• Power Consumption: 12V DC, 360mA (transmitter and receiver together).
• Dimensions: 1.3" x 1.42" x 4.1" (3.3cm x 3.6cm x 10.4cm) W, D, H
• Weight: 0.18 lbs (0.08 kg)
• Accessories: Power supply.