Tripp Lite SMART1500

SmartPro Tower UPS System - Intelligent, Line Interactive Network Power Management System, 1500VA Tower

OUR PART #: SMART1500 Write the First Review.

Is your network secure in case of a blackout? To keep your network up and running, you need reliable battery backup.
Learn More
Our Price: $547.96
List Price: $741.60
You save 26%!
Price-Matching Symbol. Low Price Guaranteed Free Shipping Available FREE Shipping
Usually ships in 7-14 business days.
Need it sooner? Call us!

Related Products

Is your network secure in case of a blackout? To keep your network up and running, you need reliable battery backup. The SMART1500 Line-Interactive UPS offers up to 20 minutes of backup runtime for a half load, in a small-footprint tower format that fits easily on or under a desk. Plus, USB and DB9 ports allow you to remotely monitor and manage your network from anywhere—keeping you in control and your equipment on-line.


  • 1.5kVA / 1500VA line interactive tower UPS system
  • 120V output, Corrects brownouts and overvoltages from 75V to 147V
  • Front panel status LEDs with load and battery capacity level display
  • USB & RS232 ports, 1 switched load bank, Hot-swap batteries
  • NEMA 5-15P input, 6 5-15R outlets

Tripp Lite's SMART1500 intelligent, line interactive UPS system protects servers, networking accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges. Large internal batteries offer 20 minutes half load runtime and 7 minutes at full load during power failures. 1500VA/980 watt power handling capability supports a variety of networking, telecom and various other application types, including the support of multiple network workstations. Includes a total of 6 outlets, 1 of which can be individually powered on and off via software interface to selectively reboot remote equipment or to automatically shed less significant loads to extend battery runtime for more critical equipment. Supports remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Supports SNMP with optional SNMPWEBSOLO external adapter. Built-in audible alarm and 5 front panel LEDs indicate status of line power, battery power, battery low/replace, voltage regulation and load level. Wall mountable with optional UPSWM wallmount bracket. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges. Attractive, small-footprint tower housing uses less than 66 square inches of floor or desktop space.



  • Output Volt Amp Capacity (VA)  1500
  • Output kVA capacity (kVA)  1.5
  • Output Watt Capacity (watts)  980
  • Output power factor  0.7
  • Nominal Output Voltage(s) Supported  120V
  • Frequency compatibility  60 Hz
  • Output voltage regulation (line mode)  -18%, +8%
  • Output voltage regulation (Battery mode)  +/- 5%
  • Built-in UPS output receptacles  6 5-15R outlet(s)
  • Built-in controllable switched load banks  One switchable single-outlet 5-15R load bank
  • Output AC waveform (AC mode)  Sine wave
  • Output AC waveform (battery mode)  PWM sine wave


  • Rated input current (at maximum load)  12A
  • Nominal Input Voltage(s) Supported  120V AC
  • UPS input connection type  5-15P
  • Input circuit breaker  15A
  • UPS Input cord length (ft.)  6
  • UPS Input cord length (m)  1.8
  • Recommended Electrical Service  15A 120V


  • Full load runtime (minutes)  7 min. (980w)
  • Half load runtime (minutes)  20 min. (490w)
  • DC system voltage (VDC)  36V DC
  • Battery recharge rate (included batteries)  Less than 4 hours from 10% to 90%
  • Replacement battery cartridge (internal UPS battery replacement)  RBC53
  • Battery Access  Battery access door
  • Battery replacement description  Hot-swappable, user replaceable batteries


  • Voltage regulation description  Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 75 to 147
  • Overvoltage correction  Input voltages between 128 and 147 are reduced by 12%
  • Undervoltage correction  Input voltages between 93 and 107 are boosted by 14%
  • Severe undervoltage correction  Input voltages between 75 and 92 are boosted by 30%


  • LED Indicators  5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
  • Alarms  Audible alarm indicates power-failure, overload and low-battery conditions
  • Alarm cancel operation  Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status
  • Switches  2 Switches control off/on power status and alarm-cancel/self-test operation


  • UPS AC suppression joule rating  480
  • UPS AC suppression response time  Instantaneous
  • EMI / RFI AC noise suppression  Yes


  • Installation form factors supported with included accessories  Tower
  • Installation form factors supported with optional accessories  Wallmount (UPSWM - tower mounting kit)
  • Primary form factor  Tower
  • UPS / Power Module dimensions in primary form factor (height x width x depth / inches)  12.8 x 7.5 x 9
  • UPS / Power Module dimensions in primary form factor (height x width x depth / cm)  32.4 x 19 x 22.9
  • UPS / Power Module weight (lbs)  38.4
  • UPS / Power Module weight (kg)  17.4
  • UPS housing material  PVC
  • Cooling method  Fan


  • Operating Temperature Range  +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
  • Storage Temperature Range  +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
  • Relative Humidity  0 to 95%, non-condensing
  • AC mode BTU / hr. (full load)  138.8
  • Battery mode BTU / hr. (full load)  454.4


  • Communications interface  USB; DB9 Serial
  • Network monitoring port description  Supports detailed monitoring of UPS and site power conditions
  • PowerAlert software  Included
  • Communications cable  USB and DB9 cabling included
  • WatchDog compatibility  Supports Watchdog application, OS and hard-reboot restart options for remote applications


  • Transfer time  2-4 milliseconds
  • Low voltage transfer to battery power (setpoint)  75
  • High voltage transfer to battery power (setpoint)  147


  • Cold Start (startup in battery mode during a power failure)  Cold-start operation supported
  • High availability UPS features  Hot swappable batteries
  • Green & high efficiency features  Greater than 95% efficiency - GREEN UPS; Individually controllable load banks


  • UPS Certifications  Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)

Click to download

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available

Call a Sales Pro at 800-356-5844 for more information