ETS ETS-PA202FP 4x XLR-F to 1.5 ft. Pigtail to RJ45 InstaSnake Adapter

Balanced Audio over Cat5 - 4 female XLR cables to RJ45. Send four balanced audio signals over a single Cat5 cable. This product features four female XLR with 1.50’ pigtail to RJ45 jack, all pins.

The ETS InstaSnake™ Series (PA200) is a compact, lightweight, versatile passive group of components allowing you to run audio signals over a single run of CAT5, 5E or 6 cables. With a roll of wire, these compact units are easily transported and/or stored solving dozens of live and/or recording sound problems.

The InstaSnake™ is a passive unit, so you do not need power. The InstaSnake™ accepts "mic" level, analog or digital audio and supports phantom power when using shielded Cat5 or 6 cables.

The basic units are a pair of passive units with bi-directional capability which can be input directly into analog or digital consoles. Designed to the highest professional standards the InstaSnake™ has a wide, flat frequency response, low THD and residual noise. The InstaSnake™ has been factory tested to 1900 feet over CAT5 using low Z dynamic microphones. Phantom power has been tested to 850 feet over shielded* cable. *Phantom Power –Shielded Cat5 or 6cables are required to pass phantom power with the exception of the PA205, which does not require shielding.

The InstaSnake™ is available in 2 basic send/receive units which can be mounted in a 2RU 19" rack, plus units with pigtails, and wall plate versions. The PA202P with 4x 18" pigtails lets you access the mixer without the need for an additional 4 microphone cables.

Features:

• Easily transported
• Low cost
• No ground loops
• Add second unit toincrease the number of channels
• May be used for analog or digital audio
• Supports 48V phantom power
• Rugged, "road-ready" construction
• Metal case
• RoHS compliant
• USA Made
• 100% tested

NOTE:

Product shown in image is for illustrative purposes only. Actual product may vary in appearance.